MacNeil Multimachine: Difference between revisions
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
Low Speed: | Low Speed: | ||
[https://www.surpluscenter.com/item.asp?item=9-7469&catname=powerTrans] | [https://www.surpluscenter.com/item.asp?item=9-7469&catname=powerTrans] <br> | ||
Available RPM: | Available RPM: | ||
*58 | *58 | ||
| Line 17: | Line 17: | ||
Medium Speed: | Medium Speed: | ||
[https://www.surpluscenter.com/item.asp?item=9-7368-100&catname=powerTrans] | [https://www.surpluscenter.com/item.asp?item=9-7368-100&catname=powerTrans] <br> | ||
Available RPM: | Available RPM: | ||
*299.2 | *299.2 | ||
| Line 25: | Line 25: | ||
High Speed: | High Speed: | ||
[https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-7073-150] | [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-7073-150] <br> | ||
Available RPM: | Available RPM: | ||
*720 | *720 | ||
Latest revision as of 22:28, 22 June 2011
Spindle Design
Spindle Style:
- Belt Driven
Motor:
- Type - Hydraulic
- Style - Belt Drive
Low Speed:
[1]
Available RPM:
- 58
- 108.75
- 193.33
- 362.5
Medium Speed:
[2]
Available RPM:
- 299.2
- 561
- 997.33
- 1870
High Speed:
[3]
Available RPM:
- 720
- 1350
- 2400
- 4500
Bearings:
- Type - Angular Contact Ball Bearings
- Contact Angle - 15 deg (more milling) 25 deg (more drilling)
- Tolerance - ABEC 7/9
- Preload - Light
- Bearing Setup - Duplex (Back to back/O)
- Lubrication - Grease (dependent on spindle speed & diameter)
Shaft:
- Bearing Location - TBD
- Tooling System - TBD (maybe ISO 30)
- Spindle Air Seal - TBD
- Labyrinth Seal - TBD
- Tool Retention System - TBD
- Belleville Washer Load - TBD
Spindle Housing:
- Type - Cartridge
- Bearing Location - TBD
- Air Seal Connection - TBD
Product Links
Angular Contact Bearings:
Design Idea Links
Spindle Air Shield:
Tooling:
Bearing Pre-Load:
Bearings:
Other: