Latest revision as of 00:47, 23 December 2011

Tools

Center the leg holder on the plate, ensuring that the leg holder is square to the plate horizontally and vertically.

@@ Line 1: / Line 1: @@
-{{Template:CEB Press Manufacturing Instructions Navbox}}
+[[Image:Feet.jpg|thumb|400px]]
-You will need 4 of these per machine. Each one requires:
+<html>
+<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=9cd8c14e87d341971211da1f85706ccd&etyp=im&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe>
+</html>
+=Tools=
-== Tools Required ==
 *Welder
+=Materials=
+*Leg Holder
-== Materials Required ==
+http://opensourceecology.org/wiki/CEB_Press/Manufacturing_Instructions/Leg_Holders
-*[[Leg Holder]] (1)
-*1/4” plate, 8”x8” (1)
-== Diagrams ==
+*Steel plate 1/4” x 8” x 8”
+=Steps=
-== Fabrication Steps ==
+*Center the leg holder on the plate, ensuring that the leg holder is square to the plate horizontally and vertically.
-) Center the leg holder on the plate, ensuring it is square in all directions. <BR/>
+*Weld the leg holder 100% to the plate.
-) Weld it 100% to the plate.
 [[Category: CEB Press]]
 [[Category:CEB Press Fabrication]]