PowerCube Oil Cooler Mount: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (Created page with "=====Oil Cooler Mount===== *[2] ¼” x 2” x 24” Plates **This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ *[2] ¼” x ...") |
Tom Griffing (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Oil Cooler and Fan Mount== | |||
The fan is secured to the oil cooler with four plastic ties, which pass through the oil cooler fins. The cooler comes with rubber vibration mounts and steel straps that secure the cooler / fan assembly to the Power Cube frame as shown below. | |||
::[[Image:OilCoolerMount.png|400px]] | ::[[Image:OilCoolerMount.png|400px]] | ||
Latest revision as of 03:27, 14 December 2011
Oil Cooler and Fan Mount
The fan is secured to the oil cooler with four plastic ties, which pass through the oil cooler fins. The cooler comes with rubber vibration mounts and steel straps that secure the cooler / fan assembly to the Power Cube frame as shown below.
