Ironworker Punching element calculations: Difference between revisions
Jump to navigation
Jump to search
| (6 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
*Analysis was to find if bolts holding weldment were strong enough. | *Analysis was to find if bolts holding weldment were strong enough. | ||
*The dimensions in the following photos: | *The dimensions in the following photos: | ||
<gallery> | <gallery> | ||
Image:dim1.png | Image:dim1.png | ||
Image:dim2.png | Image:dim2.png | ||
Image:dim3.png | Image:dim3.png | ||
</gallery> | </gallery> | ||
Here are [[ | Here are [[Media:strippercalcs1.pdf|Mischa's Results]]. | ||
===Second Analysis=== | ===Second Analysis=== | ||
We found that stripping force was actually only up to 25% ([http://books.google.com/books?id=4PZxakNhjT0C&pg=PA122&lpg=PA122&dq=punch+stripping+force&source=bl&ots=kU8Bn01b4k&sig=lOgoD1rthuwIuBRKetHNG0JSy3Q&hl=en&sa=X&ei=6-RkT6m-JMHgsQKvs722Dw&ved=0CDIQ6AEwAg#v=onepage&q=punch%20stripping%20force&f=false]) of the punching force, or 22.5 Tons total (25% of 90) | We found that stripping force was actually only up to 25% ([http://books.google.com/books?id=4PZxakNhjT0C&pg=PA122&lpg=PA122&dq=punch+stripping+force&source=bl&ots=kU8Bn01b4k&sig=lOgoD1rthuwIuBRKetHNG0JSy3Q&hl=en&sa=X&ei=6-RkT6m-JMHgsQKvs722Dw&ved=0CDIQ6AEwAg#v=onepage&q=punch%20stripping%20force&f=false]) of the punching force, or 22.5 Tons total (25% of 90) | ||
Latest revision as of 20:19, 17 March 2012
Alignment Tube Bolt Calcs
First Analysis
The following information was given to Mischa John for the first analysis by Brianna Kufa. After the first analysis, it was clear that we needed to look further into stripping force (the 45T). Brianna had assumed it was that because a friend told her it was up to 1/2 of the punching force.
- The force will be coming upwards at 45 Tons total, through the nuts.
- Analysis was to find if bolts holding weldment were strong enough.
- The dimensions in the following photos:
Here are Mischa's Results.
Second Analysis
We found that stripping force was actually only up to 25% ([1]) of the punching force, or 22.5 Tons total (25% of 90)