Cold Saw/V1 Design Rationale/Movement System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "*'''Rotary Shaft and Support''' *'''Swivel Head''' (to allow angled cuts) Image: ColdSawV1SwvHead.png Notes: The swivel clamp fastener should be mounted such that the swiv...")
 
No edit summary
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
*'''Rotary Shaft and Support'''
The movement system requires the blade to move closer to the workpiece. This is the operation movement.


*'''Swivel Head''' (to allow angled cuts)
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System/Operation Operation]


[[Image: ColdSawV1SwvHead.png]]
The movement system can allow the blade's plane of descent be at different angles to the workpiece. This is the angle movement.


Notes: The swivel clamp fastener should be mounted such that the swivel plate is horizontally clamped to the base disc. If the fastener is vertically mounted, then clamping the swivel head can cause bending that reduces the precision of the Cold Saw.
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System/Angle Angle]

Latest revision as of 00:29, 20 June 2012

The movement system requires the blade to move closer to the workpiece. This is the operation movement.

Operation

The movement system can allow the blade's plane of descent be at different angles to the workpiece. This is the angle movement.

Angle

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Rationale/Movement_System&oldid=66360"