|
|
(21 intermediate revisions by the same user not shown) |
Line 1: |
Line 1: |
| =Concepts= | | =Basic Concept= |
|
| |
|
| [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept Basic Concept]
| | http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept |
|
| |
|
| [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Blade_Rotation_System Blade Rotation System]
| | =Industry Standards= |
|
| |
|
| [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System Movement System]
| | http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis |
|
| |
|
| [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System Hold System]
| | =Systems Engineering Breakdown Diagram= |
|
| |
|
| =Feature: Fixed Blade Guard=
| | http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram |
| | |
| *'''Fixed Blade Guard''' (to protect against unintended blade contact during operation)
| |
| | |
| [[Image: ColdSawV1BladeGuard.png]]
| |
| | |
| =Feature: Forward and Backward Drive Stops=
| |
| | |
| *'''Forward and Backward Drive Stops''' (to prevent cutting into vise and to hold blade in mid-air while mounting the workpiece)
| |
| | |
| [[Image: ColdSawV1Stops.png]]
| |
| | |
| =Uniform Part Dimensions=
| |
| | |
| *'''Plate: 25.4mm x 304.8mm''' (Base Plate, Swivel Plate)
| |
| | |
| | |
| *'''Flat Bar: 76.2mm x 50.8mm''' (Shaft Block, Fixed Block, Moving Block)
| |
| | |
| *'''Flat Bar: 25.4mm x 127mm''' (Support Bar, Bridge Bar, Interface Bar, Vise Jaw)
| |
| | |
| *'''Flat Bar: 3.175mm x 25.4mm''' (Blade Guard Support)
| |
| | |
| *'''Flat Bar: 1.6mm x 152.4mm''' (Blade Guard)
| |
| | |
| | |
| *'''Round Bar: 152.4mm DIA''' (Base Disc)
| |
| | |
| *'''Round Bar: 127mm DIA''' (Blade Mount Disc)
| |
| | |
| *'''Round Bar: 76.2mm DIA''' (Shaft Collar with Axial Tensioning, Large Thrust Washer)
| |
| | |
| | |
| *'''Round Bar: 50.8mm DIA''' (Shaft Coupling, Shaft Collar)
| |
| | |
| *'''Round Bar: 31.8mm DIA''' (Shaft, Operation Handle, Vise Handle)
| |
| | |
| *'''Round Bar: 8mm DIA''' (Pin)
| |
| | |
| | |
| *'''Setscrew: M8x1.25 THREAD'''
| |
| | |
| *'''Bolts and Nuts: M12x1.75 THREAD'''
| |
| | |
| *'''Threaded Rod: M30x3.5 THREAD'''
| |
| | |
| *'''Nuts: M30x3.5 THREAD'''
| |
| | |
| =Uniform Mounting Dimensions=
| |
| | |
| *'''Swivel Mechanism'''
| |
| | |
| Base Disc Mounting Rectangle Sides: 60mm x 100mm'''
| |
| | |
| *'''Vise Mechanism'''
| |
| | |
| Vise Mounting Rectangle Sides: 50mm x 90mm
| |
| | |
| Center-to-Center Distance Between Vise Shaft and Threaded Rod: 95mm
| |
| | |
| *'''Rotary Support Mechanism'''
| |
| | |
| Shaft Block Mounting Rectangle Sides: 30mm x 55mm
| |
| | |
| *'''Drive Mechanism'''
| |
| | |
| Interface Mounting Rectangle Sides: 75mm x 80mm
| |
| | |
| Hydraulic Motor Mounting Rectangle Sides: 40mm x 100mm
| |
| | |
| *'''Blade Guard'''
| |
| | |
| Center-to-Center Distance between Blade Guard Support Screws: 100mm
| |