Cold Saw/V1 Design Rationale: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Industry Standards=
=Basic Concept=


[http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis Industry Standards Analysis]
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept


=Systems Engineering=
=Industry Standards=
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram Systems Engineering Breakdown Diagram]
 
=Concepts=
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept Basic Concept]
 
----
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Blade_Rotation_System Blade Rotation System]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Movement_System Movement System]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System Hold System]
 
=Holistic Specifications=
 
*'''The blade must bottom out at the center of the vise'''
 
*'''The swivel angle must be 90 degrees or greater.'''
 
*'''The centered swivel angle must have a precision locking mechanism'''


*'''The vise must be compatible with 45 degree cuts for at least 1" wide materials.'''
http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis


*'''The vise must be able to clamp up to 4" wide materials.'''
=Systems Engineering Breakdown Diagram=


*'''The parts must not interfere with each other's operation.'''
http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram

Latest revision as of 18:42, 20 June 2012