Cold Saw/Index: Difference between revisions
No edit summary |
|||
(10 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
= | =Complete= | ||
[[Image: ColdSawV1Full.jpg|500px]] | [[Image: ColdSawV1Full.jpg|500px]] | ||
=Base= | =Base= | ||
Line 24: | Line 20: | ||
=Swivel= | =Swivel= | ||
[[Image: ColdSawV1Swivel.jpg|500px]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Swivel | |||
=Support= | =Support= | ||
[[Image: ColdSawSupport.jpg|500px]] | |||
http://opensourceecology.org/wiki/Cold_Saw/Support | |||
=Rotation= | =Rotation= | ||
Line 40: | Line 44: | ||
http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard | http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard | ||
=Calculations= | |||
Depth of Vise Blade Slot and Maximum Cut Height | |||
http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot | |||
Base Mounting Dimensions to Swivel Angle | |||
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System/Base/Elevated_Mounting_Calculation | |||
Should the blade move towards the workpiece, or the workpiece move toward the blade, or both? | |||
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement | |||
Measure Flat Length | |||
http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc | |||
=Rationale= | |||
The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot. |
Latest revision as of 22:46, 5 July 2012
Complete
Base
http://opensourceecology.org/wiki/Cold_Saw/Base
Vise
http://opensourceecology.org/wiki/Cold_Saw/Vise
Swivel
http://opensourceecology.org/wiki/Cold_Saw/Swivel
Support
http://opensourceecology.org/wiki/Cold_Saw/Support
Rotation
http://opensourceecology.org/wiki/Cold_Saw/Rotation
Blade Guard
http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard
Calculations
Depth of Vise Blade Slot and Maximum Cut Height
http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot
Base Mounting Dimensions to Swivel Angle
Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement
Measure Flat Length
http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc
Rationale
The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot.