Board Mount: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Introduction= =Design= =Materials=") |
(→Steps) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
=Design= | =Design= | ||
[[File: boardmount1.svg|200px]] | |||
=Materials= | |||
Aluminum 6061T6511 Flat - 1/2" x 5" x 12" - from SpeedyMetals | |||
=Steps= | |||
asd | |||
---- | |||
Use CNC mini mill to drill pin hole pattern. Make sure holes do not go through the board mount; only about 1/2" deep. | |||
Latest revision as of 22:51, 30 November 2012
Introduction
Design
Materials
Aluminum 6061T6511 Flat - 1/2" x 5" x 12" - from SpeedyMetals
Steps
asd
Use CNC mini mill to drill pin hole pattern. Make sure holes do not go through the board mount; only about 1/2" deep.