Latest revision as of 07:58, 11 November 2012

Introduction

Steel Shaft - 1/2" dia x 3" long

Steel Mounting Plate - 1/4" thick x 2" wide x 4" long

Steel Support Arms - 1/4" thick x 2" wide x 4" long

Steel Wheel - 3" diameter, 1" wide

Steel Pin - 1/16" dia, 10" long

Bolt

Locknut

@@ Line 2: / Line 2: @@
 =Design=
+[[File: caster1.svg|300px]]
 =Materials=
@@ Line 7: / Line 9: @@
 [https://www.amazonsupply.com/bronze-round-temper-astm-b505/dp/B00564LL1C/ref=sr_1_1_seeall?sr=1-1&qid=1350803056 Alloy 954 Bronze, Rod] - 1" diameter
-[http://www.mcmaster.com/#metric-hex-head-cap-screws/=jtipp1 Stainless Steel 18-8, Hex Cap Screw] - M12x1.75 thread, 100mm long, 30mm thread length at end,
+Steel Shaft - 1/2" dia x 3" long
+Steel Mounting Plate - 1/4" thick x 2" wide x 4" long
+Steel Support Arms - 1/4" thick x 2" wide x 4" long
-[http://www.mcmaster.com/#hex-nuts/=jtim3l Stainless Steel 18-8, Hex Nut] - M12x1.75 thread
+Steel Wheel - 3" diameter, 1" wide
-Mounting Plate
+Steel Pin - 1/16" dia, 10" long
-Support Arms
+Bolt
-Wheel
+Locknut