PSoC Torch Height Sensing: Difference between revisions
| Line 1: | Line 1: | ||
= Cypress PSoC4 Pioneer Board for Capacitive Torch Height Sensing = | = Cypress PSoC4 Pioneer Board for Capacitive Torch Height Sensing = | ||
We are evaluating whether this board can provide operating height sensing for an oxyfuel torch and initial height sensing for a plasma torch. This is an [[Sensing_Distance_from_Work_Piece|important funtion]] required in the [[CNC Torch Table]]. | |||
A relevant demo project is here. | The PSoc4 ("Programmable System on a Chip") is a small ARM microcontroller with flexible peripherals. One of the peripheral functions is Cypress' "CapSense" capacitive touch sensing. A relevant demo project is [http://www.element14.com/community/message/76985 here]. | ||
== ChuckH testing == | |||
'''21 July 2013''' | |||
We would like to place the circuit board in a shielded enclosure a foot or so from the torch itself, especially in the case of plasma torch application. Therefore I tried connecting the sensing electrode through about 2ft of coaxial cable. I used "CATV" coax (used with cable TV and antennas) because it is a foam core, low-capacitance cable. The PSoC chip supports "driven shield" so I used it. There are two subtypes of driven shield, , it is not yet clear which is most appropriate. | |||
To help protect the CapSense input pin from noise spikes (specifically a concern about plasma torch RF noise damaging the chip) I placed a 12pf capacitor in series with the sensing electrode. I made a ring shape out of insulated 14AWG solid house wiring: | |||
Revision as of 00:35, 22 July 2013
Cypress PSoC4 Pioneer Board for Capacitive Torch Height Sensing
We are evaluating whether this board can provide operating height sensing for an oxyfuel torch and initial height sensing for a plasma torch. This is an important funtion required in the CNC Torch Table.
The PSoc4 ("Programmable System on a Chip") is a small ARM microcontroller with flexible peripherals. One of the peripheral functions is Cypress' "CapSense" capacitive touch sensing. A relevant demo project is here.
ChuckH testing
21 July 2013
We would like to place the circuit board in a shielded enclosure a foot or so from the torch itself, especially in the case of plasma torch application. Therefore I tried connecting the sensing electrode through about 2ft of coaxial cable. I used "CATV" coax (used with cable TV and antennas) because it is a foam core, low-capacitance cable. The PSoC chip supports "driven shield" so I used it. There are two subtypes of driven shield, , it is not yet clear which is most appropriate.
To help protect the CapSense input pin from noise spikes (specifically a concern about plasma torch RF noise damaging the chip) I placed a 12pf capacitor in series with the sensing electrode. I made a ring shape out of insulated 14AWG solid house wiring: