Mathias log: Difference between revisions
(Created page with " =Thu May 01, 2014= Made some sketches for the valves. Posted results here =Sun Apr 27, 2014= Marcin asked me to start designing openSource s...") |
No edit summary |
||
| Line 1: | Line 1: | ||
=Thu July 31, 2014= | |||
Worked on [[MicroHouse 3 Foundation]] | |||
built another picnic table | |||
=Wed July 30, 2014= | |||
Worked on [[MicroHouse 3 Foundation]] | |||
talked with Marcin about a small collaboration between my university JKU Linz and ose | |||
ose can provide small design projects, students will design parts and make CAD-models as part of a course | |||
=Tue July 29, 2014= | |||
Arrived at [[Factor e Farm|FeF]] | |||
=Thu May 01, 2014= | =Thu May 01, 2014= | ||
Revision as of 14:40, 1 August 2014
Thu July 31, 2014
Worked on MicroHouse 3 Foundation
built another picnic table
Wed July 30, 2014
Worked on MicroHouse 3 Foundation
talked with Marcin about a small collaboration between my university JKU Linz and ose ose can provide small design projects, students will design parts and make CAD-models as part of a course
Tue July 29, 2014
Arrived at FeF
Thu May 01, 2014
Made some sketches for the valves.
Posted results here
Sun Apr 27, 2014
Marcin asked me to start designing openSource solenoid_valves for 30 gallon per min at 3000 psi pressure.
Started research on the matter. Electrical controlled valves are necessary in order to remote-control machines from the GVCS. However, the solenoid valves for the power level of interest cost about $300 per double-acting channel. There is thus A strong case for open source solenoid valves, which we could produce for probably 1/5 of that cost.