LifeTrac II Part Sourcing

Cut List

Square tube:

• 4 × 7'8"×4"×4" tubes for base
• 3 × 5'×4"×4" under base tubes
• 2 × 52"×4"×4" vertical chassis centre tubes
• 2 × 55"×4"×4" vertical chassis tubes for front corners
• 2 × 59"×4"×4" vertical chassis tubes for rear corners (PC mounting area)
• 2 × 84"×4"×4" top chassis tubes
• 3 × 44"×4"×4" top chassis tubes

Rounds:

• 4 × 28"×1-7/8" axle shafts
• 4 × 54"1-7/8" loader shafts
• 2 × 100"×6"×2" front loader arm tubes
• 2 × 84"×6"×2" rear loader arm tubes
• 12 × 8" dom to mount loader shafts to loader arms.
• 1-7/8"bore bushing tubing to mount loader arm shafts to frame
• 1"bore tubing for 8 bushings to connect h/cylinders to loaders
• plate to mount bushings to loader arms

Plate:

• 12 × 10"×8"×0.5" steel plates to mount flange bearings and hydraulic motors to
• 2 × 12"×12"×1/2" plate to mount h/cylinders to base
• 4 × 32"diameter × 9" wheels
• 1/2"plate & 1-15/16"tubing to make wheel mounts

Other

• [16] thrust bearings - in the form of large washers with 1-7/8" hole.
• [8] double-split shaft collars, 1-7/8"

Bolts

Functionality list:

• [40] 3/4x5-1/2", with [40] washers for one side and [40] metal lock nuts for the other side. For wheel plates & cylinder plates.
• [42] 3/4"x9" bolts, [80] washers, and [40] metal lock nuts. This is for the assembly of the main frame.
• [16] 1/2"x2" bolts + [16] nylon lock nuts + [16] lock washers to suit. Motor attachment to motor interface plate. These could be 2" studs, as these are welded to the motor interface plate.
• [8] 3/4"x2" bolts for motor; [8] nuts to weld; [8] lock washers. Attachment of motor interface plate to frame.
• [32] 5/8"x2"bolts + [32] metal lock nuts, [32] lock washers to suit. Mounting of bearings to frame.
• [32] 9/16"x2" fine thread bolts, [32] washers, [32] nylon lock nuts. Attachment of wheel to wheel hub. Includes studs, nuts, and washers.
• [4] 3/4"x4.5" bolts; [8] nuts; [4] nylon lock nuts. Mounting of wheel bushings to wheel shafts.

TOTALS:

• [40] 3/4"x5.5" bolts
• [42] 3/4"x9" bolts
• [4] 3/4"x4.5" bolts
• [8] 3/4"x2" bolts
• [120] 3/4" washers
• [80] 3/4" metal lock nuts
• [16] 3/4" nuts
• [4] 3/4" nylon lock nuts
• [8] 3/4" lock washers

• [16] 1/2"x2" bolts
• [16] 1/2" nylon lock nuts
• [16] 1/2" lock washers

• [32] 5/8"x2" bolts
• [32] 5/8" metal lock nuts
• [32] 5/8" lock washers

• [32] 9/16"x2" bolts
• [32] 9/16" washers
• [32] 9/16" nylon lock nuts

Surplus Center

Functionality list:

• [8] flange Bearings - [1]
• [2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [2]
  • 4.9 square inch area at 2500 PSI implies 12000 lb of force for each cylinder
• [2] Rear loader cylinders - [3]
• [4] Motors - [4]
• [2] 1-1/4" shaft couplers - [5]
• [1] 1-3/8" 6T fully splined shafting - [6]
• [16] 1.875" double split shaft collars - [7]

(new)

• [2] 4 SPOOL SV VALVE OPEN CENTER (configured) - [8]
• [2] 1/2 NPT 30 GPM 500-1500 PSI HYD CUSHION VALVES - [9]
• Quick Couplers & Tips (need to select Q.C. to Swivel ratio); [10]

- [2] for P.Q.
- [8] for Motors
- [16?] to attach to cylinders
- [16?] for valves
- [8?] for cushion valves

• hoses [11]
• ?[8]? NPTF Tee [12] or NPTF Tee Swivels [13]
• ?(check valves?) [14]
• ?(Relief Valves?) [15]
• ?(Hydraulic pump?) [16]
• [4] Quick attach plate hydraulic cylinders. Possibly; [17]
• (what have i missed?)