Will Log

http://opensourceecology.org/wiki/User:Will

Fri July 7 2017

• created File:Power switch.FCStd

Mon July 3 2017

• created File:Letour 24V power supply.FCStd which become obsolete after discovering: File:LFX 24V Power Supply.fcstd
• File:Relay DPDT.FCStd
• File:Voltage regulator module.FCStd
• File:Gearmotor 100RPM 32206 MD.FCStd

Thu June 29 2017

• redrew STL files Lyman Filament Extruder: Spooler Electronic PCBs + Power Supply
• File:FCSTD 6 PULLER MOTOR BRKT.fcstd
• File:FCSTD 7 PULLER BRKT LT.fcstd

Wed June 28 2017

• redrew STL files Lyman Filament Extruder: Spooler Electronic PCBs + Power Supply
• File:FCSTD 1 SPOOL DISC.fcstd
• File:FCSTD 2 SPOOL CYL.fcstd
• File:FCSTD 3 SPOOL HOLDER BRKT.fcstd

Fri June 22 2017

• assembled PCB holder to circuit Mill file:File:D3D Circuit Mill.fcstd

Thu June 21 2017

• redrew STL file of PCBholder in FreeCad: File:PCBholder simplified.FCStd
• removed redundant end stops: File:D3D Circuit Mill.fcstd

Sat June 17 2017

converted these files from 13" to 16"

• Frame 16" assembled: File:Full Frame 16in.FCStd
• Single 16" frame: File:Single Frame 16in.fcstd
• Single y axis: File:D3D Circuit Mill Y Axis.fcstd
• Single x axis: File:D3D Circuit Mill X Axis.fcstd
• Single z axis: File:D3D Circuit Mill Z Axis.fcstd
• Spindle Motor: File:T-king spindlemotor.fcstd
• Spindle Motor Mount: File:D3D Circuit Mill Motor Mount.fcstd
• Assembly: File:D3D Circuit Mill.fcstd

Fri June 16 2017

updated File:D3D Circuit Mill.fcstd Assembled all pieces of the machine updated File:D3D Circuit Mill Z Axis.fcstd created bolt holes, changed size idler piece

Thu June 15 2017

updated File:D3D Circuit Mill.fcstd Added components: XYZ-axes (all 6), motor, frame, motor mount. Not yet assembled added File:D3D 13" Frame.fcstd added File:D3D Circuit Mill X Axis.fcstd 11 inch version added File:D3D Circuit Mill Y Axis.fcstd 13 inch version added File:D3D Circuit Mill Z Axis.fcstd 8 inch version

Wed June 7 2017

added File:Freecad test WvT.fcstd added Freecad test video