Arduino Power Supply v18.08: Difference between revisions
Jump to navigation
Jump to search
| Line 31: | Line 31: | ||
Cac: [https://www.digikey.com/short/jfhbz2 CAP FILM 10UF 5% 400VDC RADIAL] | Cac: [https://www.digikey.com/short/jfhbz2 CAP FILM 10UF 5% 400VDC RADIAL] | ||
Cac discharge resistor: | Cac discharge resistor: [https://www.digikey.com/short/qcz4jr 1MOhm UPL1.064] | ||
Bridge diodes (x4): [https://www.digikey.com/short/q75w83 UPL4.004] | Bridge diodes (x4): [https://www.digikey.com/short/q75w83 UPL4.004] | ||
Filter capacitor: | Filter capacitor: [https://www.digikey.com/short/jfhvmt CAP ALUM 680UF 10% 10V RADIAL] | ||
Output zener: [https://www.digikey.com/short/jfhbzz DIODE ZENER 9.1V 5W AXIAL] | Output zener: [https://www.digikey.com/short/jfhbzz DIODE ZENER 9.1V 5W AXIAL] | ||
| Line 41: | Line 41: | ||
Voltage reference: [https://www.digikey.ca/short/jf40b9 IC VREF SHUNT 4.096V TO92-3] | Voltage reference: [https://www.digikey.ca/short/jf40b9 IC VREF SHUNT 4.096V TO92-3] | ||
Voltage reference resistor: 5. | Voltage reference resistor: [https://www.digikey.com/short/jfh1qd RES 5.6K OHM 5W 5% AXIAL] | ||
Revision as of 17:05, 18 August 2018
Requirements
- Up to 300 mA supply (200 mA would likely be enough)
- 7-12 V DC output
- 120 V ac input
- Stable voltage reference of less than 5V
Research
Power requirements for Arduino Mega (usually <70 mA, 200 mA max) and RepRap Discount Smart Controller (40-100 mA?). 300 mA max to power control and display circuits.
Drawing Power from Grid without Transformer for *Low Power* Applications
Precise voltage measurement with the Arduino
High Efficiency 400W AC/DC Power Supply Reference Design
Electronics Design
These designs are not guaranteed to be safe or functional. Use at your own risk.
Bill of Materials
Cac: CAP FILM 10UF 5% 400VDC RADIAL
Cac discharge resistor: 1MOhm UPL1.064
Bridge diodes (x4): UPL4.004
Filter capacitor: CAP ALUM 680UF 10% 10V RADIAL
Output zener: DIODE ZENER 9.1V 5W AXIAL
Voltage reference: IC VREF SHUNT 4.096V TO92-3
Voltage reference resistor: RES 5.6K OHM 5W 5% AXIAL