Industrial Robot Hydraulic Design: Difference between revisions
Jump to navigation
Jump to search
(→Flow Control: Added Resources on Needle Valves) |
(→Directional Control: Added resources) |
||
| Line 13: | Line 13: | ||
=Directional Control= | =Directional Control= | ||
[http://en.wikipedia.org/wiki/Solenoid_valve Wikipedia on Solenoid Valves] | |||
[http://www.hydraulicspneumatics.com/200/FPE/IndexPage.aspx Hydraulicspenumatics on Hydraulics (including directional valves)] | |||
Possibility is 2-position, 4-way solenoid valve | |||
=Hydraulic Motor= | =Hydraulic Motor= | ||
Revision as of 18:12, 29 May 2011
Overview
The current plan is to use a parallel hydraulic circuit (constant pressure at each joint motor, varying flow based on load force and extent of valve opening). If so, flow control is necessary (to control speed of arm movement for varying load forces) and directional control is necessary (to allow reverse arm movement). Also, a pressure relief valve back to the tank is necessary to maintain continuity of flow even while all 6 joints are stationary.
Flow Control
Possibility is needle valve operated through a stepper motor which can be electronically controlled.
Directional Control
Hydraulicspenumatics on Hydraulics (including directional valves)
Possibility is 2-position, 4-way solenoid valve
Hydraulic Motor
Possibility is epicyclic (gerotor) motors