Factor e Farm Tool Infrastructure: Difference between revisions

Revision as of 19:58, 3 September 2011

Redirect to:

@@ Line 1: / Line 1: @@
-{{Merge to|Factor_e_Farm}}
+#redirect [[Factor_e_Farm#Tools]]
-=Lathe=
-[[Image:feflathe.jpg|400px]][[Image:chuck1.jpg|200px]][[Image:chuck2.jpg|200px]]
-Do we have any dimensions for:
-Throw (Distance from spindle center to the ways).
-space between the lathe ways.
-height of the compound off of the ways.
-distance from the T-slot in the compound to the edge of the compound.
-=Millermatic 200 Welder=
-=Hobart Mega Mig 450 3-Phase Welder=
-=Hobart 200 Amp 3-Phase Welder=
-=150A Stick Welder=
-=24kW 3-Phase Generator=
-=20kW 1-Phase Generator=
-=CNC Torch Table Prototype I=
-=150 Ton Hole Puncher Prototype I=
-=Heavy Duty Drill Press Prototype I=
-=Mag Drill x2=
-=15 Amp Grinder x2=
-=5 Amp Grinder x2=
-=Acetylene Torch=
-=Floor Drill Press=
-=Power Cubes=
-==18 hp Prototype I==
-==18 hp Prototype II==
-==27 hp Prototype III==
-==27 hp Prototype IV==
-=15 Amp Abrasive Metal Cutoff Saw=
-=Electric Impact Wrench=
-=Air Compressor, 10A=
-=Air Compressor, 15A=
-=3kW Inverter=
-=2.5kW Inverter=
-=800W Inverter=
-=Forklift Battery Bank, 1500AH at 12V=
-=Corded Drill x2=
-=Cordless Drill x1=
-=Wood Cutoff Saw=
-=12x7" Metal Band Saw=
-=Skil Saw (wood)=
-=Stihl MS 660 Chainsaw=
-=Reciprocating Saw=
-=Chainsaw Chain Sharpener=
-=Spray Paint Gun=
-=Heat Gun (heat shrink)=
-=Soldering Iron=
-=Soon to Come=
-*200kW induction furnace
-*Industrial Robot
-*CNC Circuit Mill
-*150 Ton Ironworker Machine
-*COld Cut metal saw
-*Surface Grinder
-*CNC Multimachine