CEB Press/Manufacturing Instructions/Linked Extension Cord: Difference between revisions
Jump to navigation
Jump to search
(→Steps) |
|||
| Line 13: | Line 13: | ||
*'''Strip the white and black wires of the male plug cord by 1.5cm.''' | *'''Strip the white and black wires of the male plug cord by 1.5cm.''' | ||
*''' | *'''Crimp a female quick-connect to the now-exposed white wire of the male plug cord''' | ||
*'''Strip the white and black wires of the female plug cord by 2.5cm.''' | *'''Strip the white and black wires of the female plug cord by 2.5cm.''' | ||
Revision as of 18:55, 24 November 2011
Materials
- 5m, 14AWG Extension Cord
Steps
- Cut the extension cord such that the male plug cord is approximately 1m long.
- Strip the loose sleeves of the male plug cord and the female plug cord by 1ft in order to expose the 3 wires: white, black, green.
- Cut the green wire for both the male and female plug cords where the stripped sleeve ends
- Strip the white and black wires of the male plug cord by 1.5cm.
- Crimp a female quick-connect to the now-exposed white wire of the male plug cord
- Strip the white and black wires of the female plug cord by 2.5cm.
- Solder alligator clips to the white and black wires of the female plug cord.
- Link the male and female plug cords together by their plugs.