PowerCube Oil Cooler Mount: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (Created page with "=====Oil Cooler Mount===== *[2] ¼” x 2” x 24” Plates **This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ *[2] ¼” x ...") |
Tom Griffing (talk | contribs) |
||
| Line 1: | Line 1: | ||
==Oil Cooler Mount== | |||
*[2] ¼” x 2” x 24” Plates | *[2] ¼” x 2” x 24” Plates | ||
**This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ | **This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ | ||
Revision as of 03:22, 14 December 2011
Oil Cooler Mount
- [2] ¼” x 2” x 24” Plates
- This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ
- [2] ¼” x 2” x 1” Plates
- [2] ¼” x 2” x 22” Plates (Note: the holes in these plates should be 6 inches apart, at 3" and 9" from bottom)
Note the correction on the dimensions of cooler mounts; hole can be oversized if washers are used:
