Marcin ose YouTube Video Content: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 18: Line 18:
*Bending of Tracks for Tractor, 27 Aug 2011 - [http://www.youtube.com/watch?v=G97cN4cVD1E&feature=plcp&context=C3312d86UAOEgsToPDskKKQH8G8HGTErq0zdJwdzLC]
*Bending of Tracks for Tractor, 27 Aug 2011 - [http://www.youtube.com/watch?v=G97cN4cVD1E&feature=plcp&context=C3312d86UAOEgsToPDskKKQH8G8HGTErq0zdJwdzLC]
*Lifetrac Erging from Cave, 7 Sep 2011 - [http://www.youtube.com/watch?v=waq2q1u5Z2A&feature=plcp&context=C350142cUAOEgsToPDskIcwLY0YWDl7bFwTMcgHrkg]
*Lifetrac Erging from Cave, 7 Sep 2011 - [http://www.youtube.com/watch?v=waq2q1u5Z2A&feature=plcp&context=C350142cUAOEgsToPDskIcwLY0YWDl7bFwTMcgHrkg]
 
*LifeTrac Trimmed in Half, 11 Sep 2011 - [http://www.youtube.com/watch?v=aS9pTyt1bQs&feature=plcp&context=C3a2aab7UAOEgsToPDskJmn98AoCHmXcye_G87Wpc8]
*Lifetrac to Bobcat Conversion Plate, 12 Sep 2011 - [http://www.youtube.com/watch?v=2TYk80tBIt4&feature=plcp&context=C3146464UAOEgsToPDskL9XSytRc6cqTl0rfOEWNor]
---
---
*Power beyond port - hack - [http://www.youtube.com/watch?v=-UYuw-Dei2Q]
*Power beyond port - hack - [http://www.youtube.com/watch?v=-UYuw-Dei2Q]
Line 102: Line 103:
*Torch Table finishing 1 - 16 Apr 2011 - [http://www.youtube.com/watch?v=oS8_meh1b8U&feature=plcp&context=C39e9b2aUAOEgsToPDskLMg-_vi29mrgcplv7FvWUI]
*Torch Table finishing 1 - 16 Apr 2011 - [http://www.youtube.com/watch?v=oS8_meh1b8U&feature=plcp&context=C39e9b2aUAOEgsToPDskLMg-_vi29mrgcplv7FvWUI]
*Torch table with faulty Xylotex controller, 17 May 2011 - [http://www.youtube.com/watch?v=wLzlj_7Cwp0&feature=plcp&context=C3579cecUAOEgsToPDskLtg8blwaR6X7qMdIxn2EJC]
*Torch table with faulty Xylotex controller, 17 May 2011 - [http://www.youtube.com/watch?v=wLzlj_7Cwp0&feature=plcp&context=C3579cecUAOEgsToPDskLtg8blwaR6X7qMdIxn2EJC]
*CNC Torch Table Tip height, 11 Sep 2011 - [http://www.youtube.com/watch?v=PTEMqvs0lJw&feature=plcp&context=C386bdd6UAOEgsToPDskIrb4MV0ri5lDWr0wAVmvO0]


=Power Cube=
=Power Cube=
*Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [http://www.youtube.com/watch?v=6dwdAF2qr7g&feature=plcp&context=C3386f25UAOEgsToPDskLTAqBwWugyZQW43psDWqHJ]
*Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [http://www.youtube.com/watch?v=6dwdAF2qr7g&feature=plcp&context=C3386f25UAOEgsToPDskLTAqBwWugyZQW43psDWqHJ]
*Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [http://www.youtube.com/watch?v=N0PgjsVKckk&feature=plcp&context=C30187fcUAOEgsToPDskKd7Tb6ODgdjmni7ZCsWZU0]
*Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [http://www.youtube.com/watch?v=N0PgjsVKckk&feature=plcp&context=C30187fcUAOEgsToPDskKd7Tb6ODgdjmni7ZCsWZU0]
Line 116: Line 119:
*Leak part 1, 11 Sep 2011 - [http://www.youtube.com/watch?v=rc387BNDzIU&feature=plcp&context=C32b250eUAOEgsToPDskJrl8Pw0gIL6MI6QOdzN769]
*Leak part 1, 11 Sep 2011 - [http://www.youtube.com/watch?v=rc387BNDzIU&feature=plcp&context=C32b250eUAOEgsToPDskJrl8Pw0gIL6MI6QOdzN769]
*Leak part 2, 11 Sep 2011 - [http://www.youtube.com/watch?v=XiS4JoSrtWQ&feature=plcp&context=C378c294UAOEgsToPDskIBrQLdDPfinJ71JirLDFfW]
*Leak part 2, 11 Sep 2011 - [http://www.youtube.com/watch?v=XiS4JoSrtWQ&feature=plcp&context=C378c294UAOEgsToPDskIBrQLdDPfinJ71JirLDFfW]
*Leak part 3, 11 Sep 2011 - [http://www.youtube.com/watch?v=wFRjaPGRQi0&feature=plcp&context=C3b67d4aUAOEgsToPDskIPusZn1Ln2CsKn6iTHECR-
*Leak part 3, 11 Sep 2011 - [http://www.youtube.com/watch?v=wFRjaPGRQi0&feature=plcp&context=C3b67d4aUAOEgsToPDskIPusZn1Ln2CsKn6iTHECR]
 
*Battery container welding, 12 Sep 2011 - [http://www.youtube.com/watch?v=GYRUCJUesCQ&feature=plcp&context=C3f3d2e8UAOEgsToPDskIcVIA9hy37FPhRTCNJB5Jb]
*Hydraulic Cooler Mounting, 12 Sep 2011 - [http://www.youtube.com/watch?v=Eg8XDFG9VpQ&feature=plcp&context=C3fe8e1aUAOEgsToPDskLBX7eGQn4M9hI4q1Gnn0-b]
*The Memorial Tom Griffing Power Cube, 12 Sep 2011 - [http://www.youtube.com/watch?v=0Tksk9DjW1s&feature=plcp&context=C35b301fUAOEgsToPDskIiewdKll8J8gEipJOS04oS]
*Power Cube Extending Plates, 12 Sep 2011 - [http://www.youtube.com/watch?v=IkbBqGUQDUA&feature=plcp&context=C389f1d6UAOEgsToPDskIBC3diuRlGzLhOZyCyLiEU]
*Tacking battery mounts, 12 Sep 2011 - [http://www.youtube.com/watch?v=ExB2FbSiHu4&feature=plcp&context=C3cdbfdeUAOEgsToPDskJBlWPUwhvKCfSk7K_ITvOm]
*Key and throttle mounts, 12 Sep 2011 - [http://www.youtube.com/watch?v=Txjp21Q5vjk&feature=plcp&context=C370870bUAOEgsToPDskJVuFdYrrpqYIsfMEXa_XFG]
*Battery Mount Cutting, 12 Sep 2011 - [http://www.youtube.com/watch?v=i2nKZUq89rU&feature=plcp&context=C33615a7UAOEgsToPDskJ97avqWh3ucK5eGiuGJXFS]
*Torching motor mount plate shaft hole, 12 Sep 2011 - [http://www.youtube.com/watch?v=1s4SbXQp38s&feature=plcp&context=C365c46dUAOEgsToPDskJVsBXi46BygLR74wGKIU9W]
*Assembly order review for power cube, 12 Sep 2011 - [http://www.youtube.com/watch?v=uuXWTjWEgu8&feature=plcp&context=C3dd449eUAOEgsToPDskIFVZnnu6OhwU_1EqVNlVyQ]
*Power Cube Power Switch, 13 Sep 2011 - [http://www.youtube.com/watch?v=VMF2L0haB4w&feature=plcp&context=C36c62fdUAOEgsToPDskLfzjfzVq9RrNmSsuHqyk03]
*Hydraulic Cooler mount bolt locations, 13 Sep 2011 - [http://www.youtube.com/watch?v=e3H9iLJPrM4&feature=plcp&context=C3818cdeUAOEgsToPDskJFirZ44qMzjZQPDUrl7UeL]
*Kohler Engine mounting in PC, 14 Sep 2011 - [http://www.youtube.com/watch?v=jn2X_yKIazA&feature=plcp&context=C33344e4UAOEgsToPDskKIoEehrukgV93P0KgpK7gA]
*Hydraulic cooler mount overview, 14 Sep 2011 - [http://www.youtube.com/watch?v=L0J0VXKFf_8&feature=plcp&context=C34980ebUAOEgsToPDskLZfDVNc0cXcw4fwRQ3mbVH]
*Kohler 25 hp mounting hint, 14 Sep 2011 - [http://www.youtube.com/watch?v=KXAxynvXIRs&feature=plcp&context=C3be2c22UAOEgsToPDskK-t8YE3cY-mBe-jAd9rqtP]
*Hydraulic cooler mounting and bolts, 14 Sep 2011 - [http://www.youtube.com/watch?v=RIy2I37aEPc&feature=plcp&context=C3535e8cUAOEgsToPDskK96E3INl-FFPFqBMecSx9H]
*Kohler engine mounting nightmares, 14 Sep 2011 - [http://www.youtube.com/watch?v=DO6wbwOjWNA&feature=plcp&context=C3846247UAOEgsToPDskL1UqJvilFVkIwoiOl-1gA2]
*Tightening Kohler engine bolts, 14 Sep 2011 - [http://www.youtube.com/watch?v=Rfuz1P1W3aU&feature=plcp&context=C3184b0bUAOEgsToPDskKByfavlPxn46MlhxZJvrUh]
*Notice on hydraulic pump mounting, 14 Sep 2011 - [http://www.youtube.com/watch?v=tLyDWI-SIcI&feature=plcp&context=C345c9c5UAOEgsToPDskLcPGIhISIHxG8cctjwObzz]
*Fan mounting, 14 Sep 2011 - [http://www.youtube.com/watch?v=KWz7glnOG5o&feature=plcp&context=C3573e2cUAOEgsToPDskJ7pScIqlNJqZPN-p-jHHXJ]
*Pump mounting bolts size, 14 Sep 2011 - [http://www.youtube.com/watch?v=AT3veAyz0gc&feature=plcp&context=C3692da9UAOEgsToPDskJbs9Az8m_xR6p7uaYAKax2]
*Fan trim for power cube, 14 Sep 2011 - [http://www.youtube.com/watch?v=Yo5-MB5oT0E&feature=plcp&context=C3804116UAOEgsToPDskKUcdA6fnXbiAqBB_r6djiu]
*Power Cube component measurements, 14 Sep 2011 - [http://www.youtube.com/watch?v=mrLaJSo5xJg&feature=plcp&context=C36f05edUAOEgsToPDskK9PmUPCKTGSPCSW6mOkxRd]
*Engine to pump coupling overview, 14 Sep 2011 - [http://www.youtube.com/watch?v=_fR7YzHi7GI&feature=plcp&context=C3ab70a2UAOEgsToPDskIPvsAL7Gd_tUaN_6X4iY4P]
*Mounts and bolts for fans, 14 Sep 2011 - [http://www.youtube.com/watch?v=5HRhaJg4pec&feature=plcp&context=C38e21eeUAOEgsToPDskJTOHymrS19brC3_tbXlM62]
*Pump mount plate detail, 14 Sep 2011 - [http://www.youtube.com/watch?v=a7YIej7xkHA&feature=plcp&context=C3309193UAOEgsToPDskLjq6E78rkRyeZ25u3qF6oD]
*Last dilemma of 25 hp Kohler mounting, 14 Sep 2011 - [http://www.youtube.com/watch?v=B92u8xjAmzo&feature=plcp&context=C379c389UAOEgsToPDskKv-XG1xeql-3pKM6a1jKLq]
*Tacking hydraulic cooler in place, 14 Sep 2011 - [http://www.youtube.com/watch?v=WLe7gyA-czw&feature=plcp&context=C3256da3UAOEgsToPDskKfWHN7DZbTP0q2AwQlJYlm]
*Tacking hydraulic cooler in place part 2, 14 Sep 2011 - [http://www.youtube.com/watch?v=xsY2TyxUYNU&feature=plcp&context=C351390dUAOEgsToPDskJLz1lnF0IXelSSjTtOAKsb]
*Pump Mounting refinement, 15 Sep 2011 - [http://www.youtube.com/watch?v=f1DQGNebHvE&feature=plcp&context=C38c487aUAOEgsToPDskLNZWtPis0e6pu8YEQT5JUh]
*Preferred engine mounting, 15 Sep 2011 - [http://www.youtube.com/watch?v=Rsi7uTiGCs4&feature=plcp&context=C3ed0c37UAOEgsToPDskL10GlVt1xR7Rw2XABgwMdv]
*Engine insertion into frame, 15 Sep 2011 - [http://www.youtube.com/watch?v=I7pNAMmzQeM&feature=plcp&context=C30f993aUAOEgsToPDskLmJjz-dURh3QG-9n40RdDb]
*Engine mounting lifetime design strategy, 15 Sep 2011 - [http://www.youtube.com/watch?v=259c13RkBSA&feature=plcp&context=C366cab7UAOEgsToPDskLFKrKw8cJvwtcCvvg9eCub]
*Pump bolt detail, 15 Sep 2011 - [http://www.youtube.com/watch?v=rAmwjopIC_M&feature=plcp&context=C3465521UAOEgsToPDskKpNzzAm5L_v8bLLhSZP5ob]
*Pump mounting with 4.5"x3/4" bolts, 16 Sep 2011 - [http://www.youtube.com/watch?v=XgWTbASJWTg&feature=plcp&context=C34e6e03UAOEgsToPDskI2raOLqVdmrGXzmnsw4OIG]
*Loose pump, 16 Sep 2011 - [http://www.youtube.com/watch?v=hZG23MKwI3A&feature=plcp&context=C37a00eeUAOEgsToPDskKyRpUG_w4Wxoefu2g-6cCs]
*Welding pump plates to engine plates, 16 Sep 2011 - [http://www.youtube.com/watch?v=UZS6ylF8oHw&feature=plcp&context=C3f56d1eUAOEgsToPDskIZeWyud52__6cdNWNTPjLi]
*Power Cube production line, 16 Sep 2011 - [http://www.youtube.com/watch?v=fccVIC35bt4&feature=plcp&context=C315bb7aUAOEgsToPDskLHIQnWiqWMzrTu1k5h8ZQY]
*Fan Attachment, 17 Sep 2011 - [http://www.youtube.com/watch?v=cPAfcqurhD4&feature=plcp&context=C30f25c0UAOEgsToPDskJc8mGbd5HbIs6jzRZnmZcK]
*Fan mount bolt pattern - welding, 17 Sep 2011 - [http://www.youtube.com/watch?v=Wnvb0RmkFfo&feature=plcp&context=C3027395UAOEgsToPDskJf5xPyNoRwKwuDi8Tx2KAe]
*Fan bolt specs, 17 Sep 2011 - [http://www.youtube.com/watch?v=Mu8fxMb1ZTs&feature=plcp&context=C3f1592eUAOEgsToPDskJmuRI4nTZbqXW2w7FTeYwQ]
*Protecting bolt threads, 17 Sep 2011 - [http://www.youtube.com/watch?v=Eo3sWEcAd3I&feature=plcp&context=C3b31b76UAOEgsToPDskIOW7YTX3bC8e-TWkIAlxy6]


=Dimensional Sawmill=
=Dimensional Sawmill=
Line 125: Line 168:
*Dimensional Sawmill Part 3, 10 Sep 2011 - [http://www.youtube.com/watch?v=pAQvFwD5CdA&feature=plcp&context=C3daaaf8UAOEgsToPDskJ-daeT8CL2yEZSoLcFR1sG]
*Dimensional Sawmill Part 3, 10 Sep 2011 - [http://www.youtube.com/watch?v=pAQvFwD5CdA&feature=plcp&context=C3daaaf8UAOEgsToPDskJ-daeT8CL2yEZSoLcFR1sG]
*Dimensional Sawmill Part 4, 10 Sep 2011 - [http://www.youtube.com/watch?v=KXe6LJB1b-I&feature=plcp&context=C3fa175fUAOEgsToPDskKv2X0aLQ11nbLkFtVQ6WWy]
*Dimensional Sawmill Part 4, 10 Sep 2011 - [http://www.youtube.com/watch?v=KXe6LJB1b-I&feature=plcp&context=C3fa175fUAOEgsToPDskKv2X0aLQ11nbLkFtVQ6WWy]
*Open Source dimensional sawmill fabrication interview, 12 Sep 2011 - [http://www.youtube.com/watch?v=TGY6Ai1zpm0&feature=plcp&context=C311eceaUAOEgsToPDskLI5u-OSqc48jai4cbXe3Qg]


=Factor e Live=
=Factor e Live=
Line 168: Line 212:
*Interview Lesa Mitchell, Kauffman Foundation, 2 Mar 2011 - [http://www.youtube.com/watch?v=Dj-EAXcpp6E&feature=plcp&context=C330f89aUAOEgsToPDskLq8BsfMxnQM6Iu0PrX03hu]
*Interview Lesa Mitchell, Kauffman Foundation, 2 Mar 2011 - [http://www.youtube.com/watch?v=Dj-EAXcpp6E&feature=plcp&context=C330f89aUAOEgsToPDskLq8BsfMxnQM6Iu0PrX03hu]
*Interview with Rufus? Who? 4 Mar 2011 - [http://www.youtube.com/watch?v=9YOKvsEqppg&feature=plcp&context=C31b013fUAOEgsToPDskKLyVNxFsRwx4DQ4NadyK-x]
*Interview with Rufus? Who? 4 Mar 2011 - [http://www.youtube.com/watch?v=9YOKvsEqppg&feature=plcp&context=C31b013fUAOEgsToPDskKLyVNxFsRwx4DQ4NadyK-x]
=CNC Lathe=
*Open Source CNC Lathe, 12 Sep 2011 - [http://www.youtube.com/watch?v=D6gQEz8OiYw&feature=plcp&context=C3ef050fUAOEgsToPDskIzQFpTb1d9yiZlb3LuZy9K]


=Misc.=
=Misc.=
Line 214: Line 262:
*Suction Strainer, 6 Sep 2011 - [http://www.youtube.com/watch?v=Fb-gDG-3rw4&feature=plcp&context=C372a41dUAOEgsToPDskKAYU6sM6JlxwcHXZHHNAPE]
*Suction Strainer, 6 Sep 2011 - [http://www.youtube.com/watch?v=Fb-gDG-3rw4&feature=plcp&context=C372a41dUAOEgsToPDskKAYU6sM6JlxwcHXZHHNAPE]
*True Fans Sunday Update 2, 11 Sep 2011 - [http://www.youtube.com/watch?v=4ScURLXTBd8&feature=plcp&context=C3e05778UAOEgsToPDskJrGIHkhkY5lzGo2bv9NCfO]
*True Fans Sunday Update 2, 11 Sep 2011 - [http://www.youtube.com/watch?v=4ScURLXTBd8&feature=plcp&context=C3e05778UAOEgsToPDskJrGIHkhkY5lzGo2bv9NCfO]
*Random Shot of Old Hay Baler, 11 Sep 2011 - [http://www.youtube.com/watch?v=44jwbr2vj7k&feature=plcp&context=C3d92dcaUAOEgsToPDskLTC-yaOQJoMcVc6ilhHzgD]
*Shonda, CNC Multimachine, and the Housing Crisis, 12 Sep 2011 - [http://www.youtube.com/watch?v=Ei54JBrbRDM&feature=plcp&context=C37d0a04UAOEgsToPDskKdr731k91r5acofxuO3zwS]
*HabLab - Margaret Ida, 12 Sep 2011 - [http://www.youtube.com/watch?v=jVKJVhZQeaI&feature=plcp&context=C3f60255UAOEgsToPDskLJfwCsrcevU6Z-NdJEy3cN]
*Natural resources to product, 12 Sep 2011 - [http://www.youtube.com/watch?v=HowhuCGhPno&feature=plcp&context=C3bd3112UAOEgsToPDskLn9EMesqKnNM5Fj1y4jxLW]
*Last prep for construction Update, 12 Sep 2011 - [http://www.youtube.com/watch?v=HHDu22Cf66o&feature=plcp&context=C3fba475UAOEgsToPDskJefbCnRr3nTiYuQZtbk9Uh]
*Last prep for construction - loading up, 12 Sep, 2011 - [http://www.youtube.com/watch?v=htoEPflXIU4&feature=plcp&context=C3afcdf6UAOEgsToPDskKgljbKmDvB-CzPf36G4X8P]
*Stringers/Wood Beams for OSE Workshop 2011, 13 Sep 2011 - [http://www.youtube.com/watch?v=K9rgJTTZN6I&feature=plcp&context=C36021f9UAOEgsToPDskK_EQqlK0eelntd17fusq96]
*KHS Class of 1991 Reunion, 14 Sep 2011 - [http://www.youtube.com/watch?v=28KfoCeH0r8&feature=plcp&context=C3301afbUAOEgsToPDskL6qHuYp-EXf880YZVg_l6J]
*Roof sections for ose shop, 15 Sep 2011 - [http://www.youtube.com/watch?v=Um3psjaBe7Y&feature=plcp&context=C3b5f602UAOEgsToPDskJsMEAh5t6CFws2_fEhqRNI]
*Emergency Construction Funding - Major Success Update, 15 Sep 2011 - [http://www.youtube.com/watch?v=FNYfk9VL03s&feature=plcp&context=C3873958UAOEgsToPDskKXChsSOdOE8TX_a6-PIRo4]
*Global supply chains, 15 Sep 2011 - [http://www.youtube.com/watch?v=GSuaPyOPNX8&feature=plcp&context=C32a645eUAOEgsToPDskIL9KviZXujkRg4aQGkzGhS]
*Chickens going freerange, 17 Sep 2011 - [http://www.youtube.com/watch?v=s89emRNjNAg&feature=plcp&context=C3129b2cUAOEgsToPDskJTzvaUVQypZ3v31sIykuHL]


=Team Member Interviews=
=Team Member Interviews=

Revision as of 21:24, 18 December 2011

This is an index of videos which may be used to supplement remote video editing.

Construction 2011

  • Transit use during HabLab construction - with John Marlatt, carpenter - [1]
  • Towards HabLab roof - [2] - with Floyd Hagerman; discuss steps and time required for putting on roof
  • Bulldozing construction site for HabLab - [3]

LifeTrac

  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [4]
  • LifeTrac Walkthrough (15 Mar 2009), 15 Mar 2009 - [5]
  • more LifeTrac detail, 18 Mar 2009 - [6]
  • Augering Post and Planting Holes, 28 Apr 2009 - [7]
  • Loader Arms Adjustment, 11 Jun 2009 - [8]
  • Lifetrac Drive, 16 Apr 2011 - [9]
  • LifeTrack III, 16 Apr 2011 - [10]
  • Bending of Tracks for Tractor, 27 Aug 2011 - [11]
  • Lifetrac Erging from Cave, 7 Sep 2011 - [12]
  • LifeTrac Trimmed in Half, 11 Sep 2011 - [13]
  • Lifetrac to Bobcat Conversion Plate, 12 Sep 2011 - [14]

---

  • Power beyond port - hack - [15]

CEB

  • CEB Cyclinder Testing, 5 Nov 2007 - [16]
  • CEB Cylinder Mounting, 26 Nov 2007 - [17]
  • CEB Testing with Hopper, 26 Dec 2007 - [18]
  • Advanced Compressed Earth Block Press Fabrication, 18 Jan 2008 - [19]
  • CEB Cylinder Mounting Assembly Preparation, 18 Jan 2008 - [20]
  • CEB Press Plate Box, 18 Jan 2008 - [21]
  • Compressed Earth Block Press Press Plate Testing, 18 Jan 2008 - [22]
  • CEB Cylinder Mounting in Frame, 18 Jan 2008 - [23]
  • First Completed CEB Prototype Testing, 18 Jan 2008 - [24]
  • First CEB Block Ejected, 18 Jan 2008 - [25]
  • Factor e Live 8, Advanced CEB Press and Solar Panels, 3 Sep 2008 - [26]
  • (Factor e Live 10) CEB Field Testing, 16 Oct 2008 - [27]
  • Open Source CEB Press Production Test Runs, 5 Nov 2008 - [28]
  • CEB Brick Production Day 1, 9 Nov 2008 - [29]
  • 5000 Compressed Earth Bricks Pressed, 25 Nov 2008 - [30]
  • CEB field report - 5691 bricks pressed, 27 Nov 2008 - [31]
  • Populating the CEB addition, 29 Nov 2008 - [32]
  • CEB Plan B - Snow flurries, 30 Nov 2008 - [33]
  • First CEB Brick Laid, 2 Dec 2008 - [34]
  • First CEB Wall Section, 3 Dec 2008 - [35]
  • CEB Wall Growing, 8 Dec 2008 - [36]
  • Mounting the trusses on the CEB building, 11 Dec 2008 - [37]
  • CEB Addition Near Completion, 19 Dec 2008 - [38]
  • Factor e Live Distillations (part 5) The CEB Story - To Build a Village, 16 Jan 2009 - [39]
  • CEB, Hexacube, and Hexayurt, 23 Feb 2009 - [40]
  • Green Roof, 26 Feb 2009 - [41]
  • CEB Hopper Problem Statement, 26 Feb 2009 - [42]
  • Hexacube 2, 5 Mar 2009 - [43]
  • Liberator 2 function, 12 Apr 2009 - [44]
  • CEB controller testing with secondary cylinder, 18/12/11 - [45]
  • CEB Controller 2011, 27 Aug 2011 - [46]
  • Compression Chamber Quality Control, 1 Sep 2011 - [47]
  • CEB Hoppers, 6 Sep 2011 - [48]
  • Finising CEB Hoppers, 7 Sep 2011 - [49]
  • CEB Secondary Cylinder hydraulic Connection, 10 Sep 2011 - [50]

---

  • roller setup - [51]
  • Grate modification - [52]
  • Reinforcing compression chamber - [53]
  • Shaker in action - [54]
  • Controller board etching playlist - [55]

Solar

  • Solar Panel Construction 1, 21 Jul 2008 - [56]
  • Solar Panel Construction 2, 21 Jul 2008 - [57]
  • Solar Panel Construction 3, 21 Jul 2008 - [58]
  • Factor e Live 8, Advanced CEB Press and Solar Panels, 3 Sep 2008 - [59]
  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [60]

Digging

  • Rotary Hydraulic Well Digging, 3 Apr 2008 - [61]
  • Digging a Well Part 2, 6 Aug 2008 - [62]
  • Augering Post and Planting Holes, 28 Apr 2009 - [63]

Rototiller

  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [64]

Biodiesel Reactor

  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [65]

Open Source Backhoe

  • Open Source Backhoe, 19 Oct 2008 - [66]
  • Open Source Tooth Bar, 22 Oct 2008 - [67]

3D Printer

  • HydraRaptor, 6 Apr 2009 - [68]
  • HydraRaptor (part 2), 7 Apr 2009 - [69]

Torch Table

  • Torch Table finishing 1 - 16 Apr 2011 - [70]
  • Torch table with faulty Xylotex controller, 17 May 2011 - [71]
  • CNC Torch Table Tip height, 11 Sep 2011 - [72]

Power Cube

  • Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [73]
  • Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [74]
  • Power Cube Frames, 7 Sep 2011 - [75]
  • Power Cube Welding with 90 Amp MIG Welder, 10 Sep 2011 - [76]
  • Power Cube Fabrication Step 1, 11 Sep 2011 - [77]
  • Power Cube Fabrication Step 2, 11 Sep 2011 - [78]
  • Power Cube Fabrication Step 3, 11 Sep 2011 - [79]
  • Power Cube Fabrication Step 4, 11 Sep 2011 - [www.youtube.com/watch?v=_h9LPdWWq9A&feature=plcp&context=C3008e42UAOEgsToPDskKjwYcrDbde2YMuk3QTk4to]
  • Power Cube Fabrication Step 5 - Clamping, 11 Sep 2011 - [80]
  • Briggs and Stratton Interim Power Cube 27 hp Engine Leak, 10 Sep 2011 - [81]
  • Leak part 1, 11 Sep 2011 - [82]
  • Leak part 2, 11 Sep 2011 - [83]
  • Leak part 3, 11 Sep 2011 - [84]
  • Battery container welding, 12 Sep 2011 - [85]
  • Hydraulic Cooler Mounting, 12 Sep 2011 - [86]
  • The Memorial Tom Griffing Power Cube, 12 Sep 2011 - [87]
  • Power Cube Extending Plates, 12 Sep 2011 - [88]
  • Tacking battery mounts, 12 Sep 2011 - [89]
  • Key and throttle mounts, 12 Sep 2011 - [90]
  • Battery Mount Cutting, 12 Sep 2011 - [91]
  • Torching motor mount plate shaft hole, 12 Sep 2011 - [92]
  • Assembly order review for power cube, 12 Sep 2011 - [93]
  • Power Cube Power Switch, 13 Sep 2011 - [94]
  • Hydraulic Cooler mount bolt locations, 13 Sep 2011 - [95]
  • Kohler Engine mounting in PC, 14 Sep 2011 - [96]
  • Hydraulic cooler mount overview, 14 Sep 2011 - [97]
  • Kohler 25 hp mounting hint, 14 Sep 2011 - [98]
  • Hydraulic cooler mounting and bolts, 14 Sep 2011 - [99]
  • Kohler engine mounting nightmares, 14 Sep 2011 - [100]
  • Tightening Kohler engine bolts, 14 Sep 2011 - [101]
  • Notice on hydraulic pump mounting, 14 Sep 2011 - [102]
  • Fan mounting, 14 Sep 2011 - [103]
  • Pump mounting bolts size, 14 Sep 2011 - [104]
  • Fan trim for power cube, 14 Sep 2011 - [105]
  • Power Cube component measurements, 14 Sep 2011 - [106]
  • Engine to pump coupling overview, 14 Sep 2011 - [107]
  • Mounts and bolts for fans, 14 Sep 2011 - [108]
  • Pump mount plate detail, 14 Sep 2011 - [109]
  • Last dilemma of 25 hp Kohler mounting, 14 Sep 2011 - [110]
  • Tacking hydraulic cooler in place, 14 Sep 2011 - [111]
  • Tacking hydraulic cooler in place part 2, 14 Sep 2011 - [112]
  • Pump Mounting refinement, 15 Sep 2011 - [113]
  • Preferred engine mounting, 15 Sep 2011 - [114]
  • Engine insertion into frame, 15 Sep 2011 - [115]
  • Engine mounting lifetime design strategy, 15 Sep 2011 - [116]
  • Pump bolt detail, 15 Sep 2011 - [117]
  • Pump mounting with 4.5"x3/4" bolts, 16 Sep 2011 - [118]
  • Loose pump, 16 Sep 2011 - [119]
  • Welding pump plates to engine plates, 16 Sep 2011 - [120]
  • Power Cube production line, 16 Sep 2011 - [121]
  • Fan Attachment, 17 Sep 2011 - [122]
  • Fan mount bolt pattern - welding, 17 Sep 2011 - [123]
  • Fan bolt specs, 17 Sep 2011 - [124]
  • Protecting bolt threads, 17 Sep 2011 - [125]

Dimensional Sawmill

  • Dimensional Sawmill Part 1, 10 Sep 2011 - [126]
  • Dimensional Sawmill Part 2, 10 Sep 2011 - [127]
  • Dimensional Sawmill Part 3, 10 Sep 2011 - [128]
  • Dimensional Sawmill Part 4, 10 Sep 2011 - [129]
  • Open Source dimensional sawmill fabrication interview, 12 Sep 2011 - [130]

Factor e Live

  • Factor e Live, 2 Jun 2008 - [131]
  • Factor e Live Week 2, 18 Jun 2008 - [132]
  • Factor e Live - Part 3, 1 Jul 2008 - [133]
  • Couldn't find part 4.
  • Factor e Live - Part 5, 17 Aug 2008 - [134]
  • Factor e Live - Part 6, Solar Turbine Beginnings, 18 Aug 2008 - [135]
  • Factor e Live - Episode 7, 25 Aug 2008 - [136]
  • (Factor e Live 8) Advanced CEB Press and Solar Panels, 3 Sep 2008 - [137]
  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [138]
  • (Factor e Live 10) CEB Field Testing, 16 Oct 2008 - [139]

Factor e Live Distillations

  • Factor e Live Distillations (part 1), 5 Jan 2009 - [140]
  • Factor e Live Distillations (part 2), 7 Jan 2009 - [141]
  • Factor e Live Distillations (part 3) Towards the Open Source Tractor, 12 Jan 2009 - [142]
  • Factor e Live Distillations (part 4) On the technology base for Evolving to Freedom, 13 Jan 2009 - [143]
  • Factor e Live Distillations (part 5) The CEB Story - To Build a Village, 16 Jan 2009 - [144]
  • Factor e Live Distillations (part 6) Personal Fabrication Machines, 20 Jan 2009 - [145]
  • Factor e Live Distillations (part 7) Open Source Permaculture and Local Food Systems (part 7), 25 Jan 2009 - [146]
  • Factor e Live Distillations (part 8) $1/Watt Solar Thermal Concentrator Steam Powered Electric Generator, 3 Feb 2009 - [147]
  • Factor e Live Distillations (part 9) Open Collaborative Development, 5 Feb 2009 - [148]
  • Factor e Live Distillations (part 10) Open Economic Model, 6 Feb 2009 - [149]
  • Factor e Live Distillations - Post Scarcity Village, 10 Sep 2009 - [150]

TED Talks Event: Behind the Scenes

  • Suzanne Lee's Kombucha Clothing, 27 Feb 2011 - [151]
  • Meet a TED Fellow, 27 Feb 2011 - [152]
  • Fellows Reception, 27 Feb 2011 - [153]
  • Putting on makeup part 1, 28 Feb 2011 - [154]
  • Putting on makeup part 2, 28 Feb 2011 - [155]
  • Putting on makeup part 3, 28 Feb 2011 - [156]
  • Random Ted Talks Clip Part 1, 28 Feb 2011 - [157]
  • Random Ted Talks Clip Part 2, 28 Feb 2011 - [158]
  • Random Ted Talks Clip Part 3, 2 Mar 2011 - [159]
  • Random Ted Talks Clip Part 4, 4 Mar 2011 - [160]
  • A Ted Talks Presentation - who?, 4 Mar 2011 - [161]
  • Interview Lesa Mitchell, Kauffman Foundation, 2 Mar 2011 - [162]
  • Interview with Rufus? Who? 4 Mar 2011 - [163]

CNC Lathe

  • Open Source CNC Lathe, 12 Sep 2011 - [164]

Misc.

  • Heat Exchanger, 2 Nov 2007 - [165]
  • Cordwood Addition Roof, 9 Dec 2007 - [166]
  • Goat Birth, 1 May 2008 - [167]
  • Walnut Grafting, 4 May 2008 - [168]
  • Babington Burner "Flamethrower" Atomizing Oil, 1 Oct 2008 - [169]
  • Babington Burner "Flamethrower" Continued, 2 Oct 2008 - [170]
  • Open Source On-Demand Water Heater, 2 Nov 2008 - [171]
  • Torch Table Day 1, 10 Dec 2008 - [172]
  • Ama Makes the Goat Feeder, 20 Feb 2009 - [173]
  • Starting the workshop stove for the first time, 1 Mar 2009 - [174]
  • Fruit Propagation Workshop, 1 Mar 2009 - [175]
  • Future Kitchen, 2 Mar 2009 - [176]
  • Making Notebooks, 6 Mar 2009 - [177]
  • Grafting and Root Cuttings Details, 7 Mar 2009 - [178]
  • Spring Rains, 16 Mar 2009 - [179]
  • Hexahatch Incubator, 4 Apr 2009 - [180]
  • Industry Standard Cooking Video, 11 Apr 2009 - [181]
  • Goat Birth, 16 Apr 2009 - [182]
  • Compressed Air Water Pump Design, 10 Jun 2009 - [183]
  • After TED Talks Update, 6 Mar 2011 - [184]
  • Cutting Rocks, 16 Mar 2011 - [185]
  • Workshop Addition Complete, 28 Mar 2011 - [186]
  • Video of a Wind Turbine, 31 Mar 2011 [187]
  • Polish TV Interview, 5 Apr 2011 - [188]
  • Random Polish TV Interview Member Clip, 5 Apr 2011 - [189]
  • Random Pig Video, 5 Apr 2011 - [190]
  • Random Train Ride Clip, 5 Apr 2011 - [191]
  • Random HD Sample, 11 Apr 2011 - [192]
  • New Welder: Megamig 450, 16 Apr 2011 - [193]
  • Welder Testing, 16 Apr 2011 - [194]
  • Xylotex Controller Configuration, 16 Apr 2011 - [195]
  • Remote Sensing, 17 May 2011 - [196]
  • Wheel shaft gussets, 19 Jun 2011 - [197]
  • Bandsaw, 19 Jun 2011 - [198]
  • Project Update, 4 Aug 2011 - [199]
  • Power to Solenoid, 12 Aug 2011 - [200]
  • Ergonomics of Cleaning Tank Bungs Prior to Welding, 1 Sep 2011 - [201]
  • Fabrication of 5 Fuel and Hydraulic Tanks, 2 Sep 2011 - [202]
  • Tapping threaded holes on Engine, 2 Sep 2011 - [203]
  • Meeting On Friday, 2 Sep 2011 - [204]
  • Grate Shaker Assembly, 3 Sep 2011 - [205]
  • Suction Strainer, 6 Sep 2011 - [206]
  • True Fans Sunday Update 2, 11 Sep 2011 - [207]
  • Random Shot of Old Hay Baler, 11 Sep 2011 - [208]
  • Shonda, CNC Multimachine, and the Housing Crisis, 12 Sep 2011 - [209]
  • HabLab - Margaret Ida, 12 Sep 2011 - [210]
  • Natural resources to product, 12 Sep 2011 - [211]
  • Last prep for construction Update, 12 Sep 2011 - [212]
  • Last prep for construction - loading up, 12 Sep, 2011 - [213]
  • Stringers/Wood Beams for OSE Workshop 2011, 13 Sep 2011 - [214]
  • KHS Class of 1991 Reunion, 14 Sep 2011 - [215]
  • Roof sections for ose shop, 15 Sep 2011 - [216]
  • Emergency Construction Funding - Major Success Update, 15 Sep 2011 - [217]
  • Global supply chains, 15 Sep 2011 - [218]
  • Chickens going freerange, 17 Sep 2011 - [219]


Team Member Interviews

  • Isaiah Saxon, 11 Mar 2011 - [220]
  • Dan Granett, 11 Mar 2011 - [221]
  • Brianna Kufa, 24 Aug 2011 - [222]
  • Chris, 24 Aug 2011 - [223]
  • Tom, 24 Aug 2011 - [224]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Marcin_ose_YouTube_Video_Content&oldid=48496"