CEB/Gen3/BOM: Difference between revisions
< CEB
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
=Steel Cut List= | =Steel Cut List= | ||
Cut the steel into the following lengths. Label and separate cuts by "Make Page" number so you can easily find cuts for each step during the fabrication stage. | *Cut the steel into the following lengths. | ||
*Label and separate cuts by "Make Page" number so you can easily find cuts for each step during the fabrication stage. | |||
<html><iframe width=' | *Note: Item Number and part number refer to CAD information. This is un-necessary if you are following the fabrication steps listed. | ||
<html><iframe width='800' height='300' frameborder='0' src='https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AtAVl-K5-trVdFQ3MHJBZ2h0dFlqcjBib1NnZ25CZGc&output=html'></iframe> | |||
</html><br/> | </html><br/> | ||
[https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AtAVl-K5-trVdFQ3MHJBZ2h0dFlqcjBib1NnZ25CZGc&output=html Link] to editable and printable page. | [https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AtAVl-K5-trVdFQ3MHJBZ2h0dFlqcjBib1NnZ25CZGc&output=html Link] to editable and printable page. | ||
Revision as of 23:28, 19 December 2011
Steel Order List
Link to editable and printable page.
Hydraulics Order List
Steel Cut List
- Cut the steel into the following lengths.
- Label and separate cuts by "Make Page" number so you can easily find cuts for each step during the fabrication stage.
- Note: Item Number and part number refer to CAD information. This is un-necessary if you are following the fabrication steps listed.
Link to editable and printable page.