CEB Press/Manufacturing Instructions/Arms - primary: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 3: | Line 3: | ||
=Part Information= | =Part Information= | ||
The primary arms attach the cylinder/frame assembly to the secondary arms, which support it. They also attach to the | The primary arms attach the cylinder/frame assembly to the secondary arms, which support it. They also attach to the Brickholder Plate, the Dirt-Keeper Plate, the Controller Mount, and the Valve Mount. | ||
=Tools= | =Tools= | ||
Revision as of 00:52, 23 December 2011
Part Information
The primary arms attach the cylinder/frame assembly to the secondary arms, which support it. They also attach to the Brickholder Plate, the Dirt-Keeper Plate, the Controller Mount, and the Valve Mount.
Tools
- Hole punch with 13/16" and 3/4" dies
- Measuring Tape
- Metal Marking Utensil
Materials
- [2] Steel Angle 4" A by 6" B, 1/2" Thickness, 72" Length
Steps
- Mark and punch holes as shown below.
Left
Right
- Label arms as left and right.