CNCCMV2/CAD: Difference between revisions
< CNCCMV2
Jump to navigation
Jump to search
| Line 16: | Line 16: | ||
*Standard 31mm center-to-center mounting holes. Modular. | *Standard 31mm center-to-center mounting holes. Modular. | ||
=Sleeve Bearing Mount Uniformity= | |||
*Use the same sleeve bearing type throughout machine | |||
*2 fastening holes on the part to which sleeve bearing should be mounted. For sleeve bearing of 24mm diameter, mount circle with 10+15mm washers and 1mm clearance should be 24 + 10 + 2 = 36mm diameter. | |||
Revision as of 20:42, 1 April 2012
Block Uniformity
- Keep 2 block dimensions same for all blocks
- Based on the conceptual design, 1 of the block dimensions will solely be used to fit the diameter of the leadscrews, precision shafts, and sleeve bearings.
- The other block dimension to be uniform will mostly support the part by its length on precision shafts.
- For accomodating leadscrew nuts up to 10mm or 3/8" dia, dimension 1 will be 40mm.
Stepper Motor Mount Uniformity
- Use the same stepper motor type for each axis.
- Nema 17 steppers for appropriate performance characteristics.
- Standard 31mm center-to-center mounting holes. Modular.
Sleeve Bearing Mount Uniformity
- Use the same sleeve bearing type throughout machine
- 2 fastening holes on the part to which sleeve bearing should be mounted. For sleeve bearing of 24mm diameter, mount circle with 10+15mm washers and 1mm clearance should be 24 + 10 + 2 = 36mm diameter.