Cold Saw/V1 Design Parameters/Drive System: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Hydraulic Motor= | =Hydraulic Motor= | ||
*'''Mount Hole Pattern: 40mm x 100mm''' | |||
*'''Mount Hole Diameter: 12.7mm''' | |||
=Interface Plate= | |||
*'''Length: 200mm''' | |||
*'''Width: 75mm''' | |||
*'''Thickness: 25mm''' | |||
*'''Motor Mount Hole Spacing Along Length: 20mm, 120mm''' | |||
*'''Motor Mount Hole Spacing Along Width: 20mm, 60mm''' | |||
*'''Motor Mount Hole: 12mm''' | |||
*'''Interfacing Hole Spacing Along Length: 150mm, 180mm''' | |||
*'''Interfacing Hole Spacing Along Width: 20mm, 60mm''' | |||
*'''Interface Hole: M12''' | |||
=Shaft Coupling= | =Shaft Coupling= | ||
Revision as of 00:31, 21 May 2012
Hydraulic Motor
- Mount Hole Pattern: 40mm x 100mm
- Mount Hole Diameter: 12.7mm
Interface Plate
- Length: 200mm
- Width: 75mm
- Thickness: 25mm
- Motor Mount Hole Spacing Along Length: 20mm, 120mm
- Motor Mount Hole Spacing Along Width: 20mm, 60mm
- Motor Mount Hole: 12mm
- Interfacing Hole Spacing Along Length: 150mm, 180mm
- Interfacing Hole Spacing Along Width: 20mm, 60mm
- Interface Hole: M12
Shaft Coupling
Inside Plate
Outside Plate
Spindle
- Outside Diameter: 1.25"
- Length: XX
Blade
- Bore: 1.25"
- Diameter: XX