Cold Saw/V1 Design Parameters/Drive System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 26: Line 26:


=Shaft Coupling=
=Shaft Coupling=
*'''Outside Diameter:
*'''Bore: 31.8mm'''
*'''Length:
*'''Setscrew Hole Diameter:
*'''Setscrew Hole Spacing Along Length:


=Inside Plate=
=Inside Plate=

Revision as of 00:34, 21 May 2012

Hydraulic Motor

  • Mount Hole Pattern: 40mm x 100mm
  • Mount Hole Diameter: 12.7mm

Interface Plate

  • Length: 200mm
  • Width: 75mm
  • Thickness: 25mm
  • Motor Mount Hole Spacing Along Length: 20mm, 120mm
  • Motor Mount Hole Spacing Along Width: 20mm, 60mm
  • Motor Mount Hole: 12mm
  • Interfacing Hole Spacing Along Length: 150mm, 180mm
  • Interfacing Hole Spacing Along Width: 20mm, 60mm
  • Interface Hole: M12

Shaft Coupling

  • Outside Diameter:
  • Bore: 31.8mm
  • Length:
  • Setscrew Hole Diameter:
  • Setscrew Hole Spacing Along Length:

Inside Plate

Outside Plate

Spindle

  • Outside Diameter: 1.25"
  • Length: XX

Blade

  • Bore: 1.25"
  • Diameter: XX
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Drive_System&oldid=62889"