Cold Saw/V1 Design Parameters/Drive System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 38: Line 38:


=Inside Plate=
=Inside Plate=
*'''Length:
*'''Width:
*'''Thickness:
*'''


=Outside Plate=
=Outside Plate=

Revision as of 00:44, 21 May 2012

Hydraulic Motor

  • Mount Hole Pattern: 40mm x 100mm
  • Mount Hole Diameter: 12.7mm

Interface Plate

  • Length: 200mm
  • Width: 75mm
  • Thickness: 25mm
  • Motor Mount Hole Spacing Along Length: 20mm, 120mm
  • Motor Mount Hole Spacing Along Width: 20mm, 60mm
  • Motor Mount Hole: 12mm
  • Interfacing Hole Spacing Along Length: 150mm, 180mm
  • Interfacing Hole Spacing Along Width: 20mm, 60mm
  • Interface Hole: M12

Shaft Coupling

  • Outside Diameter: 51.4mm
  • Bore: 31.8mm
  • Length: 75mm
  • Setscrew Hole Diameter: (4mm Hex)
  • Setscrew Hole Spacing Along Length: 25mm

Inside Plate

  • Length:
  • Width:
  • Thickness:

Outside Plate

Spindle

  • Outside Diameter: 1.25"
  • Length: XX

Blade

  • Bore: 1.25"
  • Diameter: XX
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Drive_System&oldid=62892"