Cold Saw/V1 Design Parameters/Drive System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 12: Line 12:


*'''Thickness: 25mm'''
*'''Thickness: 25mm'''
*'''Drive Hole Diameter: 40mm'''
*'''Drive Hole Spacing Along Length: 70mm'''
*'''Drive Hole Spacing Along Width: 40mm'''


*'''Motor Mount Hole Spacing Along Length: 20mm, 120mm'''
*'''Motor Mount Hole Spacing Along Length: 20mm, 120mm'''
Line 39: Line 45:
=Inside Plate=
=Inside Plate=


*'''Length:
*'''Length: 75mm
 
*'''Width: 75mm


*'''Width:
*'''Thickness: 12mm'''


*'''Thickness:
*'''Drive Hole Spacing: 37.5mm, 37.5mm'''


*'''
*'''Pinhole Pattern from center: XXmm, XXmm'''


=Outside Plate=
=Outside Plate=
*'''Length: 75mm
*'''Width: 75mm
*'''Thickness: 12mm'''
*'''Drive Hole Spacing: 37.5mm, 37.5mm'''
*'''Pinout Pattern from center: XXmm, XXmm'''


=Spindle=
=Spindle=
Line 53: Line 71:
*'''Outside Diameter: 1.25"'''
*'''Outside Diameter: 1.25"'''


*'''Length: XX'''
*'''Length: 75mm'''


=Blade=
=Blade=
Line 59: Line 77:
*'''Bore: 1.25"'''
*'''Bore: 1.25"'''


*'''Diameter: XX'''
*'''Diameter: 250mm'''
 
*'''Pinhole Pattern from center: XXmm, XXmm'''

Revision as of 00:49, 21 May 2012

Hydraulic Motor

  • Mount Hole Pattern: 40mm x 100mm
  • Mount Hole Diameter: 12.7mm

Interface Plate

  • Length: 200mm
  • Width: 75mm
  • Thickness: 25mm
  • Drive Hole Diameter: 40mm
  • Drive Hole Spacing Along Length: 70mm
  • Drive Hole Spacing Along Width: 40mm
  • Motor Mount Hole Spacing Along Length: 20mm, 120mm
  • Motor Mount Hole Spacing Along Width: 20mm, 60mm
  • Motor Mount Hole: 12mm
  • Interfacing Hole Spacing Along Length: 150mm, 180mm
  • Interfacing Hole Spacing Along Width: 20mm, 60mm
  • Interface Hole: M12

Shaft Coupling

  • Outside Diameter: 51.4mm
  • Bore: 31.8mm
  • Length: 75mm
  • Setscrew Hole Diameter: (4mm Hex)
  • Setscrew Hole Spacing Along Length: 25mm

Inside Plate

  • Length: 75mm
  • Width: 75mm
  • Thickness: 12mm
  • Drive Hole Spacing: 37.5mm, 37.5mm
  • Pinhole Pattern from center: XXmm, XXmm

Outside Plate

  • Length: 75mm
  • Width: 75mm
  • Thickness: 12mm
  • Drive Hole Spacing: 37.5mm, 37.5mm
  • Pinout Pattern from center: XXmm, XXmm

Spindle

  • Outside Diameter: 1.25"
  • Length: 75mm

Blade

  • Bore: 1.25"
  • Diameter: 250mm
  • Pinhole Pattern from center: XXmm, XXmm
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Drive_System&oldid=62893"