Telecommunication: Difference between revisions
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
=Hardware Setup= | =Hardware Setup= | ||
* | *The ISP's coaxial cable connects to the internet port of the modem. | ||
=Software Setup= | =Software Setup= | ||
Revision as of 22:54, 31 May 2012
Infrastructure
Our telecommunication infrastructure consists of:
- 1 coaxial cable connected to the hardware of our Internet Service Provider (ISP)
- 1 modem
- 3 WRT54GL routers (Source)
- 2 outdoor waterproof direct burial Cat5e cables (200ft each) (Source)
Hardware Setup
- The ISP's coaxial cable connects to the internet port of the modem.
Software Setup
- Router firmware: Tomato
- Base router's settings:
Basic
Network: PPPoE
DHCP Server: Enabled; 192.168.1.100 to 192.168.1.199
Router IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
- Boost routers' settings:
Basic
Network: Disabled
DHCP Server: Disabled
Router IP Address: 192.168.1.3 (second router); 192.168.1.4 (third router)
Subnet Mask: 255.255.255.0