Latest revision as of 05:04, 11 June 2012

Steps

Fasten metal seats onto the concrete at the points where wooden support beams will be raised

Set up wooden support beams vertically and horizontally to produce the angled frame of the building

Revision as of 05:04, 11 June 2012 (view source) YK (talk \| contribs) (Created page with "=Steps= Fasten metal seats onto the concrete at the points where wooden support beams will be raised Set up wooden support beams vertically and horizontally to produce the an...")		Latest revision as of 05:04, 11 June 2012 (view source) YK (talk \| contribs) m (→‎Steps)
Line 4:		Line 4:

	*Set up wooden support beams vertically and horizontally to produce the angled frame of the building		*Set up wooden support beams vertically and horizontally to produce the angled frame of the building

	*Lay metal roofing over the wooden frame and fasten the roofing onto the wooden beams using fasteners that tighten for a water-tight, weather-resistant seal. Be sure to leave plenty of overhang (~3ft) because CEB walls are susceptible to precipitation.