Cold Saw/V1 Design Rationale: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
*'''The swivel angle must be 90 degrees or greater.''' | *'''The swivel angle must be 90 degrees or greater.''' | ||
*'''The vise must be compatible with 45 degree cuts for at least 1" wide materials.''' | |||
*'''The vise must be able to clamp up to 4" wide materials.''' | |||
Revision as of 17:31, 12 June 2012
Systems Engineering
Systems Engineering Breakdown Diagram
Concepts
Holistic Notes
- The blade must bottom out at the center of the vise
- The swivel angle must be 90 degrees or greater.
- The vise must be compatible with 45 degree cuts for at least 1" wide materials.
- The vise must be able to clamp up to 4" wide materials.