Cold Saw/V1 Design Rationale: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
Line 26: | Line 26: | ||
*'''The vise must be able to clamp up to 4" wide materials.''' | *'''The vise must be able to clamp up to 4" wide materials.''' | ||
*'''The parts must not interfere with each other's operation.''' |
Revision as of 19:44, 14 June 2012
Systems Engineering
Systems Engineering Breakdown Diagram
Concepts
Holistic Specifications
- The blade must bottom out at the center of the vise
- The swivel angle must be 90 degrees or greater.
- The centered swivel angle must have a precision locking mechanism
- The vise must be compatible with 45 degree cuts for at least 1" wide materials.
- The vise must be able to clamp up to 4" wide materials.
- The parts must not interfere with each other's operation.