Cold Saw/V1 Design Rationale: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Industry Standards= | =Analyze Industry Standards= | ||
http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis | |||
=Systems Engineering= | =Analyze Systems Engineering Breakdown= | ||
http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram | |||
= | =Conceptualize= | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept Basic Concept] | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept Basic Concept] | ||
Revision as of 22:36, 19 June 2012
Analyze Industry Standards
http://opensourceecology.org/wiki/Cold_Saw/Industry_Standards_Analysis
Analyze Systems Engineering Breakdown
http://opensourceecology.org/wiki/Cold_Saw/V1_Systems_Engineering_Breakdown_Diagram
Conceptualize
Holistic Specifications
- The blade must bottom out at the center of the vise
- The swivel angle must be 90 degrees or greater.
- The centered swivel angle must have a precision locking mechanism
- The vise must be compatible with 45 degree cuts for at least 1" wide materials.
- The vise must be able to clamp up to 4" wide materials.
- The parts must not interfere with each other's operation.