Cold Saw/Build Instructions/Base to Vise: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Drilling the Fixed Block= http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block Check the mill's vertical alignment. Mount a drill chuck to the mill. Mount ...") |
No edit summary |
||
| Line 22: | Line 22: | ||
Drill the counterbore, moving to each hole location. | Drill the counterbore, moving to each hole location. | ||
=Drill the Base Flat= | |||
=Drill the Base Plate= | |||
Revision as of 18:28, 19 June 2012
Drilling the Fixed Block
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block
Check the mill's vertical alignment.
Mount a drill chuck to the mill.
Mount the Fixed Block on the mill, oriented to drill the 4 mounting holes.
Check the mount's vertical alignment.
Mount a pilot bit onto the mill.
Drill the pilot holes, moving to each hole location accurately.
Change the bit for the thru hole diameter.
Drill the thru holes, moving to each hole location.
Change the bit for the counterbore.
Drill the counterbore, moving to each hole location.