Cold Saw/Understand: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Design Principles= | |||
http://opensourceecology.org/wiki/Design_Principles | |||
=Functions= | =Functions= | ||
| Line 8: | Line 12: | ||
Hold the material. | Hold the material. | ||
=General Design Requirements= | |||
Precision requires rigidity. | |||
Functional design avoids interference between mechanisms. | |||
=Objectives= | =Objectives= | ||
| Line 21: | Line 31: | ||
Clamping materials of at least 4" width. | Clamping materials of at least 4" width. | ||
=More Information= | =More Information= | ||
http://opensourceecology.org/wiki/Cold_Saw/Understand2 | http://opensourceecology.org/wiki/Cold_Saw/Understand2 | ||
Revision as of 05:46, 1 July 2012
Design Principles
http://opensourceecology.org/wiki/Design_Principles
Functions
Rotate the blade.
Move the blade into the material.
Angle the blade relative to the material.
Hold the material.
General Design Requirements
Precision requires rigidity.
Functional design avoids interference between mechanisms.
Objectives
Precision cuts with surface deviation of less than 0.1mm
Precision center angle locking mechanism with deviation of less than 1 degree
Precision perpendicular descent with vertical cutting plane angled within 1 degree.
Up to 45 degree cuts for at least 1" wide materials.
Clamping materials of at least 4" width.