Cold Saw/Index: Difference between revisions
Line 2: | Line 2: | ||
[[Image: ColdSawV1Full.jpg|500px]] | [[Image: ColdSawV1Full.jpg|500px]] | ||
=Base= | =Base= |
Revision as of 22:45, 5 July 2012
Complete
Base
http://opensourceecology.org/wiki/Cold_Saw/Base
Vise
http://opensourceecology.org/wiki/Cold_Saw/Vise
Swivel
http://opensourceecology.org/wiki/Cold_Saw/Swivel
Support
http://opensourceecology.org/wiki/Cold_Saw/Support
Rotation
http://opensourceecology.org/wiki/Cold_Saw/Rotation
Blade Guard
http://opensourceecology.org/wiki/Cold_Saw/Blade_Guard
Calculations
Depth of Vise Blade Slot and Maximum Cut Height
http://opensourceecology.org/wiki/Cold_Saw/Depth_Blade_Slot
Base Mounting Dimensions to Swivel Angle
Should the blade move towards the workpiece, or the workpiece move toward the blade, or both?
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Basic_Concept/Movement
Measure Flat Length
http://opensourceecology.org/wiki/Cold_Saw/Measure_Flat_Calc
Rationale
The vise-supporting platform is large. The vise is fastened by 4 bolts. Reason: for irregular-shaped materials, the vise can be removed and the platform can be used as the work surface. Of course, elevating materials must be placed as to create a blade slot.