Terminal Case CNC 1: Difference between revisions
(Created page with "=Materials= [https://www.amazonsupply.com/dp/B003U6HU9U/ref=sp_dp_g2c_asin Aluminum Plate 1/4" x 12" x 36"] [https://www.amazonsupply.com/dp/B003U6HWI4/ref=sp_dp_g2c_asin Alumi...") |
No edit summary |
||
| Line 9: | Line 9: | ||
[http://www.amazonsupply.com/dp/B000ILHW9I/ref=sp_dp_g2c_asin HDPE Plate 1/4" x 12" x 24"] | [http://www.amazonsupply.com/dp/B000ILHW9I/ref=sp_dp_g2c_asin HDPE Plate 1/4" x 12" x 24"] | ||
= | =Steps= | ||
Organize the materials | |||
[[File: case1mats.jpg|200x200px]] | |||
Cut the aluminum plate to 14" x2 lengths. Cut the bar to 13" x2 and 12" x2 lengths. Cut the rubber to 0.5" length. Cut the plastic plate to 13" length by 10.5" width (make it smaller than bigger) | |||
[[File: case1aplate.jpg|200x200px]] [[File: case1bar.jpg|200x200px]] [[File: case1rubber.jpg|200x200px]] [[File: case1pplate.jpg|200x200px]] | |||
Position, tack weld, and weld the bars onto the aluminum plate to form an open aluminum box. | |||
[[File: case1position.jpg|200x200px]] [[File: case1tackweld.jpg|200x200px]] [[File: case1weld.jpg|200x200px]] | |||
Drill the bars to make holes for cables and wires. | |||
[[File: case1drillbars.jpg|200x200px]] | |||
Position and bend the rubber inside the case. Then, move one side of the plastic plate into the rubber, then press down the other end of the plastic plate in order to mount the plastic plate inside the box. | |||
Revision as of 06:29, 15 October 2012
Materials
Aluminum Plate 1/4" x 12" x 36"
Pure Tan Gum Rubber 1/8" x 12" x 24"
Steps
Organize the materials
Cut the aluminum plate to 14" x2 lengths. Cut the bar to 13" x2 and 12" x2 lengths. Cut the rubber to 0.5" length. Cut the plastic plate to 13" length by 10.5" width (make it smaller than bigger)
File:Case1aplate.jpg File:Case1bar.jpg File:Case1rubber.jpg File:Case1pplate.jpg
Position, tack weld, and weld the bars onto the aluminum plate to form an open aluminum box.
File:Case1position.jpg File:Case1tackweld.jpg File:Case1weld.jpg
Drill the bars to make holes for cables and wires.
Position and bend the rubber inside the case. Then, move one side of the plastic plate into the rubber, then press down the other end of the plastic plate in order to mount the plastic plate inside the box.