CEB Press/ModularRollers: Difference between revisions
Jump to navigation
Jump to search
Frankacony (talk | contribs) No edit summary |
Frankacony (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
In a curve, the ubars are directly touching each other on the inner side. The ubars need to be wide enough to leave space for the movement of the rollers. Therefore the curved guiderail can live without the bottom support of the straight guiderails. | In a curve, the ubars are directly touching each other on the inner side. The ubars need to be wide enough to leave space for the movement of the rollers. Therefore the curved guiderail can live without the bottom support of the straight guiderails. | ||
[[File: | |||
[[File:Ubar.png]] | |||
Revision as of 21:16, 30 October 2012
This is a design sketch based on the original CEB Press/Rollers sketchup file.
The idea is to make the roller easily extendable, fit a specific length or curve with different types of guiderails that can be attached without tools by wingnuts. The guiderails can be 2 + x elements long. The curved guiderails are supposed to be hand-bendable into any curve / configuration.
In a curve, the ubars are directly touching each other on the inner side. The ubars need to be wide enough to leave space for the movement of the rollers. Therefore the curved guiderail can live without the bottom support of the straight guiderails.
