Funnel: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Design= Aluminum for corrosion resistance. Cone with hole welded to straight tube. Making cone: shear sheet metal to a circle. Drill hole at circle-center and cut an arc out...") |
No edit summary |
||
| Line 6: | Line 6: | ||
Making cone: shear sheet metal to a circle. Drill hole at circle-center and cut an arc out of the circle depending on desired angle of cone. Weld ends of incomplete circle together. | Making cone: shear sheet metal to a circle. Drill hole at circle-center and cut an arc out of the circle depending on desired angle of cone. Weld ends of incomplete circle together. | ||
=Materials= | |||
Tube - | |||
Sheet - | |||
Revision as of 06:16, 15 November 2012
Design
Aluminum for corrosion resistance.
Cone with hole welded to straight tube.
Making cone: shear sheet metal to a circle. Drill hole at circle-center and cut an arc out of the circle depending on desired angle of cone. Weld ends of incomplete circle together.
Materials
Tube -
Sheet -