Grate: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 22: | Line 22: | ||
No grate holes necessary along long angle top because the deflectors can be mounted with the long angle side holes. | No grate holes necessary along long angle top because the deflectors can be mounted with the long angle side holes. | ||
=Grate Deflectors for [[CEB Press]] | |||
Revision as of 21:03, 23 November 2012
Grate for CEB Press
A lot of pictures to be uploaded here.
Grate uses:
1/8" x 2" x 2" Steel Angle 1/8" x 2" Steel Flat 3/4" Nuts and Bolts
Grate Long Angle: 72" length x2
Grate Short Angle: 26.5" length x2 (Short Angles fit inside Long Angles)
Grate Short Flat Length: 26.5" (Spaced 2" apart, 68" opening length to cover, hence quantity is 34-1=33 pieces, total length is 33*26.5"=874.5"=73') it may turn out to be only 32 needed due to tolerances.
Grate Long Flat Length: 65"
Grate Holes Along Short Angle Side: 9", 18" (13/16" or 20mm dia)
Grate Holes Along Long Angle Side: 26", 46" (13/16" or 20mm dia)
No grate holes necessary along long angle top because the deflectors can be mounted with the long angle side holes.
=Grate Deflectors for CEB Press