Grate

Grate for CEB Press

A lot of pictures to be uploaded here.

---

Grate uses:

• 1/4" x 2" x 2" Steel Angle
• 1/4" x 2" Steel Flat
• 3/4" Nuts and Bolts

---

Grate Long Angle: 72" length x2

Grate Short Angle: 26.5" length x2 (Short Angles fit inside Long Angles)

Grate Short Flat Length: 26.5" (Spaced 2" apart, 68" opening length to cover, hence quantity is 34-1=33 pieces, total length is 33*26.5"=874.5"=73') it may turn out to be only 32 needed due to tolerances.

Grate Long Flat Length: 65"

Grate Holes Along Short Angle Side: 9", 18" (13/16" or 20mm dia)

Grate Holes Along Long Angle Side: 26", 46" (13/16" or 20mm dia)

No grate holes necessary along long angle top because the deflectors can be mounted with the long angle side holes.

Grate Deflectors for CEB Press

---

Grate deflectors use:

• 1/8" thick steel sheet
• 1/4" x 2" x 2" steel angle

---

Short deflector sheet: 27" x 14" (x2) Holes near bottom 27" edge: 9", 18" (13/16" dia)

Long deflector angle: 6' long Holes near bottom 6' edge: 26", 46" (13/16" dia) Long deflector sheet: 36" x 9" (x2)

Grate Hinges for CEB Press

---

Grate Hinges use:

• 1/4" x 2" Steel Flat
• 1/2" x 3" Steel Flat
• Steel Piano Hinges

---

Piano Hinge: 16" long (x2)

Thin Hinge Flat: 24" (x2) Centered Holes along 24": 2", 22" (24mm dia)

Thick Hinge Flat: 30" long (x2) Centered Holes along 30": 1.5", 28.5" (24mm dia)