Shopping List: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
'''MicroTrac Body''' | '''MicroTrac Body''' | ||
[[Image:Wheelmotors.jpg|thumb|32 cu in wheel motor, 5130 in oz torque, 145 rpm at 20 gpm]] | [[Image:Wheelmotors.jpg|thumb|32 cu in wheel motor, 5130 in oz torque, 145 rpm at 20 gpm]] | ||
[[Image:microtrac_valve.jpg|thumb|3 spool, OC, 25 gpm valve]] | |||
[[Image:3by8cyl.jpg|thumb|[https://surpluscenter.com/item.asp?UID=2009042919480888&item=9-5460&catname=hydraulic 3x8" cylinder], SAE 8 in/out, 16" closed pin-to-pin]] | [[Image:3by8cyl.jpg|thumb|[https://surpluscenter.com/item.asp?UID=2009042919480888&item=9-5460&catname=hydraulic 3x8" cylinder], SAE 8 in/out, 16" closed pin-to-pin]] | ||
*Wheel motor - [https://surpluscenter.com/item.asp?UID=2009042715025596&catname=hydraulic&qty=1&item=9-7469] - $250 - use quick coupling for interchangeability of motor, shared between devices | *Wheel motor - [https://surpluscenter.com/item.asp?UID=2009042715025596&catname=hydraulic&qty=1&item=9-7469] - $250 - use quick coupling for interchangeability of motor, shared between devices | ||
**Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer | **Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer | ||
**MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared. | **MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared. | ||
*control valve, 3 body - [https://surpluscenter.com/item.asp?UID=2009041514290385&item=9-7175&catname=hydraulic] - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports | *control valve, 3 body - [https://surpluscenter.com/item.asp?UID=2009041514290385&item=9-7175&catname=hydraulic] - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports | ||
*3.0 inch cylinder - SAE 8 outlets - [https://surpluscenter.com/item.asp?UID=2009050111530930&item=9-5460&catname=hydraulic] | *3.0 inch cylinder - SAE 8 outlets - [https://surpluscenter.com/item.asp?UID=2009050111530930&item=9-5460&catname=hydraulic] | ||
*2 bearings - 1 7/8" - | |||
*Fittings | *Fittings | ||
*Metal | *Metal | ||
Revision as of 18:04, 1 May 2009
Shopping List for April 27, 2009:
MicroTrac Body
3x8" cylinder, SAE 8 in/out, 16" closed pin-to-pin
- Wheel motor - [1] - $250 - use quick coupling for interchangeability of motor, shared between devices
- Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer
- MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared.
- control valve, 3 body - [2] - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports
- 3.0 inch cylinder - SAE 8 outlets - [3]
- 2 bearings - 1 7/8" -
- Fittings
- Metal
- 1 7/8" shaft
Power Cube
- Coupler -
- Pump - [4] - $181, 12 gpm at 3600 psi
- Filter -
- Fittings
- Metal
Pulverizer
Note: can convert Rototiller to pulverizer, and auger (posthole, planting auger, mixer), according to 'lifesize erector set' philosophy. This can be done by exchanging the motor for a faster one, and using a different set of tines.
- Coupler - needs PTO 6-spline to 1-7/8" shaft converter
- Fittings - have PTO motor already; maybe purchase quick connects for it (in/out sae 10, sae 4 case drain)
- Go from SAE 4 to 1/4 male for $1
- Go from SAE 10 to 1/2 NPTM at $2
- Need two coupler pairs at 1/2" - at $16 and one at 1/4" - 1/4" pair at $11
- Metal
CEB Prototype 2
- 5x8x2.5" cylinder -
- 14 inch cylinder
- cam rollers -
- Guide Bearings
- Fittings
HexaHatch
- Motor -
- Coupler -