Lathe Build: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→Auger) |
||
| Line 3: | Line 3: | ||
Ben, | Ben, | ||
So here's my plan right now. Use a hydrauilic fixture with 20 hp that can be fixed to a table readily. This is what I have already on | So here's my plan right now. Use a hydrauilic fixture with 20 hp that can be fixed to a table readily. This is what I have already on [[LifeTrac]] - a stiff auger mechanism: | ||
[[Image:multiauger.jpg|thumb]] | [[Image:multiauger.jpg|thumb]] | ||
=Bill of Materials= | =Bill of Materials= | ||
Revision as of 04:41, 22 November 2009
Auger
Ben,
So here's my plan right now. Use a hydrauilic fixture with 20 hp that can be fixed to a table readily. This is what I have already on LifeTrac - a stiff auger mechanism:
Bill of Materials
Here is the bill of materials:
Lathe
Is it possible to convert the auger to a lathe? Sure. Take a chuck from here.
Add a slide from Enco. See review
