Moriah Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
=Tues Jun 10, 2014=
=Tues Jun 10, 2014=


*Worked on the instruction manual to the Solenoid Assembly Module.
*Worked on the instruction manual to the [https://docs.google.com/presentation/d/1SUUtXan2g-ZltK5WlgeAXnqHiHaWgqLzG8JlQRqrjkc/edit#slide=id.p: Solenoid Module Assembly].
 
*Converted .stl files to .gcode files to print on the LULZBOT 3-D printer through slic3r.


=Mon Jun 9, 2014=
=Mon Jun 9, 2014=
Line 9: Line 11:
*Introduction to the CEB Press.
*Introduction to the CEB Press.


*Worked on the instruction manual for the Solenoid Assembly Module.
*Worked on the instruction manual for the Solenoid Module Assembly.


*Leveled a 3D-Printer (LULZBOT)
*Leveled a 3D-Printer (LULZBOT)

Revision as of 14:28, 11 June 2014

Tues Jun 10, 2014

  • Converted .stl files to .gcode files to print on the LULZBOT 3-D printer through slic3r.

Mon Jun 9, 2014

  • First day at FeF.
  • Introduction to the CEB Press.
  • Worked on the instruction manual for the Solenoid Module Assembly.
  • Leveled a 3D-Printer (LULZBOT)
  • Ran Bed Level Check tests
  • Successfully printed my first 3D print. A PLA tubing with holes.

Mon Jun 9, 2014

  • First day at FeF.
  • Introduction to the CEB Press.
  • Worked on the instruction manual for the Solenoid Assembly Module.
  • Leveled a 3D-Printer (LULZBOT)
  • Ran Bed Level Check tests
  • Successfully printed my first 3D print. A PLA tubing with holes.