Moriah Log: Difference between revisions
Jump to navigation
Jump to search
Moriah Baltz (talk | contribs) |
Moriah Baltz (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
=Wed Jun 11, 2014= | |||
*Worked on the instruction manual to the [https://docs.google.com/presentation/d/1SUUtXan2g-ZltK5WlgeAXnqHiHaWgqLzG8JlQRqrjkc/edit#slide=id.p: Solenoid Module Assembly]. | |||
*Rotated the drawing of the male bushing clampshell .stl file in FreeCad. | |||
*Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer at an infill density of 0.3. | |||
*Helped assemble the metal frame of the pool. | |||
=Tues Jun 10, 2014= | =Tues Jun 10, 2014= | ||
| Line 15: | Line 25: | ||
*Presentation on 3D Printing - [https://docs.google.com/a/opensourceecology.org/presentation/d/1csmBrlVIua4N-r2lH0gmbRBTo3uhPyPOd_EgnBuMY4A/edit#slide=id.g34eeff40f_020] | *Presentation on 3D Printing - [https://docs.google.com/a/opensourceecology.org/presentation/d/1csmBrlVIua4N-r2lH0gmbRBTo3uhPyPOd_EgnBuMY4A/edit#slide=id.g34eeff40f_020] | ||
=Mon Jun 9, 2014= | =Mon Jun 9, 2014= | ||
Revision as of 14:49, 12 June 2014
Wed Jun 11, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Rotated the drawing of the male bushing clampshell .stl file in FreeCad.
- Tested 3-d printing a quarter scale model of the male bushing clampshell on the TAZ LULZBOT printer at an infill density of 0.3.
- Helped assemble the metal frame of the pool.
Tues Jun 10, 2014
- Worked on the instruction manual to the Solenoid Module Assembly.
- Installed a plug-in on sketchup to export files as .stl files.
- Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer.
- (testing at slic3r settings> Infill> Fill Density> .05)
- 3-D printed the Minimug.
- Viewed .stl files to check measurements in meshlab.
- Presentation on 3D Printing - [1]
Mon Jun 9, 2014
- First day at FeF.
- Introduction to the CEB Press.
- Worked on the instruction manual for the Solenoid Assembly Module.
- Leveled a 3D-Printer (LULZBOT)
- Ran Bed Level Check tests
- Successfully printed my first 3D print. A PLA tubing with holes.