The Liberator Assembly: Difference between revisions
Jump to navigation
Jump to search
(Created page with 'After unpacking the crate as in The_Liberator_Packing_List, you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly vid…') |
No edit summary |
||
| Line 4: | Line 4: | ||
</html> | </html> | ||
Assembly begins by locating a flat spot on the ground, preferably in a covered space in case of foul weather. | |||
[[Step 1. Stand frame.]] | |||
#Place the main frame flat on the ground as shown in figure Step 1. The machine front is defined as the orientation of the frame in which the main cylinder senor is on your right hand side when facing the machine frame. Right and left sides are defined accordingly. | |||
#Attach the primary arms. The primary arms are those arms without the leg holders. The right hand arm, which is the one with the holes, shoul be oriented as shown in Step 2. | |||
Revision as of 05:56, 10 June 2010
After unpacking the crate as in The_Liberator_Packing_List, you are ready to assemble the machine. The assembly procedure is the reverse temporal order of the disassembly video from the blog:
Assembly begins by locating a flat spot on the ground, preferably in a covered space in case of foul weather.
- Place the main frame flat on the ground as shown in figure Step 1. The machine front is defined as the orientation of the frame in which the main cylinder senor is on your right hand side when facing the machine frame. Right and left sides are defined accordingly.
- Attach the primary arms. The primary arms are those arms without the leg holders. The right hand arm, which is the one with the holes, shoul be oriented as shown in Step 2.