3D Printer Build Plate

This is a page describing OSE's knowledge about different FFF 3D Printer build plates.

Commercial Solutions

BuildTak

http://buildtak.com A black tape that's easy to apply and remove from any material. Thin enough so inductive sensing is possible if glued to metal surface. Might make prints stick too hard if temperatures are high and first layer gets squashed down too hard.

Geckotek

http://www.geckotek3d.com/

Sheets of metal with coating. The metal is flexible, which eases print removal. It also allows inductive sensing. We should not use their magnet solution before we know if it would interfere with the inductive sensing.

PrintBite

http://mutley3d.com/PrintBite/

Zebra Plate

http://www.printinz.com/zebra-plate/

3D Eez glue

Has some PVA in it.

Forum Threads

https://groups.google.com/forum/#!msg/deltabot/mTvRDQkVQoY/sph0NnkcEgAJ

Blog posts

http://richrap.blogspot.se/2015/01/stick-with-it-3d-printing-print-bed.html