D3D Ohio 18.20 Calculations: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with " These are bounds and other calculations for the D3D Ohio printer =Extruder boundry calculations= X plus File:XPlus bounds extruder d3d oh.png|1000x1000px|border|X plus bo...")
 
(-added new calcs)
Line 17: Line 17:


=PVC frame rendering calculations=
=PVC frame rendering calculations=
the pvc frame is generated by adding the length of an axis plus the diameter of two pipe thicknesses.
this initial version uses one inch pipes, so that was added to either end.
The rod length of all axis was 500mm.
The outer diameter of a 1" sch 40 pipe is 1.31"
so, our length for each axis of the frame was 533.5mm

Revision as of 05:19, 17 April 2018


These are bounds and other calculations for the D3D Ohio printer

Extruder boundry calculations

X plus X plus bounds

X Minux X minus bounds

Y plus Y plus bounds

Y minus Y minus bounds

PVC frame rendering calculations

the pvc frame is generated by adding the length of an axis plus the diameter of two pipe thicknesses. this initial version uses one inch pipes, so that was added to either end.

The rod length of all axis was 500mm. The outer diameter of a 1" sch 40 pipe is 1.31" so, our length for each axis of the frame was 533.5mm