The Liberator Full Product Release Improvements: Difference between revisions
Jump to navigation
Jump to search
(Created page with 'There is a couple of minor improvements to be made for The Liberator since its June 13, 2010 release. *Use 4 bolts instead of 2 to connect the primary arms to the secondary arms…') |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Category=CEB press}} | |||
There is a couple of minor improvements to be made for The Liberator since its June 13, 2010 release. | There is a couple of minor improvements to be made for The Liberator since its June 13, 2010 release. | ||
*Use 4 bolts instead of 2 to connect the primary arms to the secondary arms on the secondary cylinder side of the frame. | *Use 4 bolts instead of 2 to connect the primary arms to the secondary arms on the secondary cylinder side of the frame. | ||
*Leg holders should have adjustment bolts on their side instead of on their front (for transportation on the back of a pickup truck). This is to prevent the bolts from breaking the rear window of the pickup. | *Leg holders should have adjustment bolts on their side instead of on their front (for transportation on the back of a pickup truck). This is to prevent the bolts from breaking the rear window of the pickup. | ||
Latest revision as of 17:29, 8 February 2011
There is a couple of minor improvements to be made for The Liberator since its June 13, 2010 release.
- Use 4 bolts instead of 2 to connect the primary arms to the secondary arms on the secondary cylinder side of the frame.
- Leg holders should have adjustment bolts on their side instead of on their front (for transportation on the back of a pickup truck). This is to prevent the bolts from breaking the rear window of the pickup.