HyperMesh: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
Outside resiliency is desired. | Outside resiliency is desired. | ||
PSU - A Power Supply Unit that would provide sufficient power to all the component parts. | *PSU - A Power Supply Unit that would provide sufficient power to all the component parts. | ||
PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the | *PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the *BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system. | ||
BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system. | *8P8C - An Ethernet connector for physically interfacing with the HyperMesh device. | ||
8P8C - An Ethernet connector for physically interfacing with the HyperMesh device. | |||
Configuration and diagnosis would take place via Ethernet or through Wireless connection. | Configuration and diagnosis would take place via Ethernet or through Wireless connection. | ||
| Line 21: | Line 20: | ||
http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg | http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg | ||
PSU - A Power Supply Unit that would provide sufficient power to all the component parts. | *PSU - A Power Supply Unit that would provide sufficient power to all the component parts. | ||
PPE - Primary Processing Element, a Central Processing Unit. | *PPE - Primary Processing Element, a Central Processing Unit. | ||
I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly. | *I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly. | ||
RAM - enough to operate quickly and efficiently even under high stress. | *RAM - enough to operate quickly and efficiently even under high stress. | ||
SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly. | *SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly. | ||
NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS. | *NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS. | ||
License: TAPR Open Hardware License | License: TAPR Open Hardware License | ||
Website: http://ubermesh.blogspot.com | Website: http://ubermesh.blogspot.com | ||
Revision as of 01:11, 19 February 2011
Main > Software > Wireless mesh networking
The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community.
The specifications must be identified:
- Multiple Input, Multiple Output
- Opportunistic mesh networking
- Ethernet, wireless, and broadband connectivity
- 3G/4G compatible
- VOIP
- Price point per unit of less than $50, less than $20 is preferred.
Outside resiliency is desired.
- PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
- PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the *BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.
- 8P8C - An Ethernet connector for physically interfacing with the HyperMesh device.
Configuration and diagnosis would take place via Ethernet or through Wireless connection.
Alternatively, http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg
- PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
- PPE - Primary Processing Element, a Central Processing Unit.
- I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly.
- RAM - enough to operate quickly and efficiently even under high stress.
- SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.
- NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.
License: TAPR Open Hardware License
Website: http://ubermesh.blogspot.com