Open Source Car Concept

Wanted: NEEDS CLEANING and SHOULD ALSO BE PUT UNDER TRUCK

- Nice - Marcin

Conversation with Dan Foukes

It's 200/200, not 2000/200

No transportation outside of walking or cycling is necessary at that scale. For connection to other hubs, I suggest train. For transit to remote locations, I suggest a 200 mpg equivalent modern steam engine microcar hybrid.

1. We have a concept in mind similar to Urbee. Can you help us draw a concept with similar aerodynamics? We are considering a 1000 lb, 12-18 hp, hydraulic drive car, first plain gasoline, then moving to hybrid.

• • response1) creating a vehicle form scratch, modify something current, or recycle something from the past?

Modern with a 3D printed body using an open source printer. Urbee has a printed body.

for an example, google:cushman truckster.

Not highway safe.

hybrid is still in basic development. what about bio-diesel? you can make it your self.

How about modern steam fueled by pelletized biomass? We should have this in one year. In the meantime, gas or biodiesel is fine.

1. statement2)For the truck, we want a Unimog-like car with suspension, 60 mph. Main task is to design the suspension and steering, and then we can prototype. Once again - hydrauilic drive for add-on power units.

• • response2)what tonage is the unimog?

1 ton equivalent (F350) cargo capacity should be our first cut. It should have serious traction power like a F350 to do things like haul 20,000 lb of woodchips from 30 miles away, on a trailer. \

how much tonnage do you need? a ford or chevy diesel stake truck to run on bio diesel i think would work fine. would his vehicle be used to move the different equipment around?

yes, it would have attachment plates and hydraulic takeoff to handle anything that the tractor can.

in your list of 50 machines, what about a crane or forklift for loading and unloading equipment?

There is already the Tractor; a forklift is an inexpensive attachment for the quick-connect plate.

let me know what you think.

Some thoughts from Mark Rudnicki on the Open Source Car:

- Basing th OSCar on the Urbee would allow for radically faster development than starting from scratch. I suggest that Marcin contact Jim Kor and make a pitch for him to open source the Urbee.

- RepRap machines or modified larger versions could be used to produce the body panels for the OSCar, but it's unknown how resilient these panels would be to things like bumping and extreme heat and cold. If we find that RepRapped panels are not durable enough, then perhaps RepRap machines could be used to produce forms from which fiberglass or carbon fiber composite body panels would be produced.

- Using a three-wheel design like the Urbee would probably allow for the OSCar to be registered as a motorcycle and therefore avoid a lot of legal requirements.

- Using a three-wheel design would allow for the back wheel to be directly driven which would obviate a differential, shafts, etc.

- Using a hybrid hydraulic system would allow us to exploit Power Cube technology. The drive wheel would be coupled directly to a compact hydraulic motor. Regeneration from braking could also be conveniently exploited.

- Using a fairly large accumulator would allow for good city fuel efficiency and good acceleration.

- The coefficient of drag of the Urbee is quite good: 0.146 acccording to http://en.wikipedia.org/wiki/Automobile_drag_coefficient.

- Plastic windows would be nice, but scratching of the windshield would be a concern.

- As many off-the-shelf parts as possible should be used to allow for quick development. Such parts could later be replaced by similar open source parts.

- A rough calculation for fuel efficiency is 140 MPG at 60 MPH assuming that a 10 HP engine would be used.